MemoryPmod
About the MemoryPmod PCB
MemoryPmod is an open source PCB design by mdrobot7, published on GitHub. It is a 2-layer board measuring 47.3 × 20.3 mm, with 8 components from 5 distinct parts.
Other key parts include the 23LC512T-I/SN and AT25SF041B-SSHB-B. By type, the board carries 3 ICs, 3 resistors and 2 connectors.
From the project
Mirror of the Chip Forge hardware repository, containing hardware for the uGPU senior design project. Mirror of https://git.ece.iastate.edu/isu-chip-fab/hardware
Main components on the MemoryPmod
MemoryPmod bill of materials (BOM)
8 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 23LC512T-I/SN 512KBit SRAM | SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 1 | AT25SF041B-SSHB-B 4MBit NOR Flash | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | PHED-RS012G1ABOGA-C006 PMOD_Male | PMOD_Male | J1 |
| 1 | PPTC062LJBN-RC PMOD_Female | PMOD_Female | J2 |
| 3 | RC0402JR-0710KL 10kΩ | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
MemoryPmod design files
The KiCad project lives in the mdrobot7/senior-design-hardware repository on GitHub; these links point at the commit this page was built from.
MemoryPmod: common questions
How big is the MemoryPmod PCB?
The MemoryPmod measures 47.3 × 20.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MemoryPmod?
8 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the MemoryPmod design files?
From the mdrobot7/senior-design-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MemoryPmod design in my own project?
The repository has no license, so all rights stay with mdrobot7. Use it as a reference, and ask the author before reusing the design.
