5 V BNC Polarity Indicator
About the 5 V BNC Polarity Indicator PCB
5 V BNC Polarity Indicator is an open source PCB design by meawoppl, published on GitHub. It is a 2-layer board measuring 32 × 20 mm, with 4 components from 4 distinct parts.
By type, the board carries 2 diodes, 1 connector and 1 resistor.
From the project
v1: first 10 ESP32 + FPGA modules ordered — exact fabrication files and checksums preserved by Git tag v1.
v1: first 10 ESP32 + FPGA modules ordered — exact fabrication files and checksums preserved by Git tag v1.
Choose a board in the portal using the selector configured in .kicad-pcb.json.
- ESP32 + FPGA module: routed four-layer prototype; current checks and fabrication previews are included. - Original MainBoard: native KiCad import for reference; original Fusion/Eagle exports in source/fusion. - Direction LED tester: existing board and fabrication files described below.
5 V BNC Polarity Indicator bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C597934 KH-BNC50-3511 | ANT-TH_KH-BNC50-3511 | J1 |
| 1 | LTST-C150GKT GREEN | LED_1206_3216Metric | D1 |
| 1 | LTST-C150KRKT RED | LED_1206_3216Metric | D2 |
| 1 | 0805W8F1001T5E 1kR | R_0805_2012Metric | R1 |
5 V BNC Polarity Indicator design files
The KiCad project lives in the meawoppl/bp-test repository on GitHub; these links point at the commit this page was built from.
5 V BNC Polarity Indicator: common questions
How big is the 5 V BNC Polarity Indicator PCB?
The 5 V BNC Polarity Indicator measures 32 × 20 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 5 V BNC Polarity Indicator?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 5 V BNC Polarity Indicator design files?
From the meawoppl/bp-test repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 5 V BNC Polarity Indicator design in my own project?
The repository has no license, so all rights stay with meawoppl. Use it as a reference, and ask the author before reusing the design.
