Embedded System Hands On I

meierh·Embedded_System_Hands_On_I·Project/PCB/smartEggTimer.kicad_pcb

Embedded System Hands On I PCB layout, top view — open source STM32 board by meierh

About the Embedded System Hands On I PCB

Embedded System Hands On I is an open source STM32 PCB design by meierh, published on GitHub. It is a 2-layer board measuring 72 × 72 mm, with 44 components from 15 distinct parts.

Its main chip is the C8322, from the STM32 family. Other key parts include the C500795. By type, the board carries 22 resistors, 18 capacitors, 2 ICs, 1 switch and 1 inductor.

From the project

All files related to the group project can be found in the Project folder. It contains the following parts of our project:

All files related to the group project can be found in the Project folder. It contains the following parts of our project:

- PCB Design - Case Design - Software - High-Level Software with emulated hardware (developed while the PCB was not finished yet) - Full Software for our custom PCB (extension of the high-level software to work with the custom PCB) - Audio Files :smile:

Main components on the Embedded System Hands On I

C8322C500795

Embedded System Hands On I bill of materials (BOM)

44 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C8322
STM32F103RET6
U1
1
C500795
AP7361C-33E
U2
1
C351238
EC12E24204A2
SW2
1
C1002
600R
FB1
1
C19702
10u
C1
6
C307331
100n
C2, C3, C4, C5, C6, C14
3
C15195
10n
C7, C12, C13
6
C52923
1u
C8, C9, C15, C16, C17, C18
2
C1779
4u7
C10, C11
3
C25900
4k7
R1, R6, R7
9
C25744
10k
R2, R8, R9, R10, R11, R14, R16, R18 +1
3
C25741
100k
R4, R22, R23
1
C25076
100
R5
2
C26083
1M
R12, R13
4
C25768
22k
R15, R17, R19, R21

Embedded System Hands On I design files

The KiCad project lives in the meierh/Embedded_System_Hands_On_I repository on GitHub; these links point at the commit this page was built from.

Embedded System Hands On I: common questions

What microcontroller does the Embedded System Hands On I use?

The Embedded System Hands On I is built around the C8322, from the STM32 family.

How big is the Embedded System Hands On I PCB?

The Embedded System Hands On I measures 72 × 72 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Embedded System Hands On I?

44 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Embedded System Hands On I design files?

From the meierh/Embedded_System_Hands_On_I repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Embedded System Hands On I design in my own project?

The repository has no license, so all rights stay with meierh. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Embedded System Hands On I without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards