JC8012P4A1C backplate

Meisterschulen-am-Ostbahnhof-Munchen·JC8012P4A1C_I_W_Y_CAN·backplate/JC8012P4A1C_backplate.kicad_pcb

JC8012P4A1C backplate PCB layout, top view — open source board by Meisterschulen-am-Ostbahnhof-Munchen

About the JC8012P4A1C backplate PCB

JC8012P4A1C backplate is an open source PCB design by Meisterschulen-am-Ostbahnhof-Munchen, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 242.8 × 158.7 mm, with 4 components from 1 distinct parts.

From the project

JC8012P4A1C_I_W_Y addon PCB for CAN-Bus

Back plate for the JC8012P4A1CIW_Y display with the CAN addon board. It closes the frame at the back and carries a VESA 100 mount. KiCad 10 project, made as a bare PCB.

- FR4 1.6 mm, 2 layers, no copper pours: the WLAN antenna is glued into the display cover directly behind the plate. Do not make it from an aluminium PCB. - Outline 242.8 × 158.7 mm, corner radius 10 mm (outer size of the display shell and of the frame). - H1–H4: Würth WA-SMSI 9774100482R SMD steel spacers, M4 internal thread, L 10 mm, soldered on the inside (F side) on the VESA 100 × 100 grid. The land pattern is the one…

JC8012P4A1C backplate, from the project README
From the project README

JC8012P4A1C backplate bill of materials (BOM)

4 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
9774100482R
Spacer M4 L10
Wurth Elektronik
H1, H2, H3, H4

JC8012P4A1C backplate design files

The KiCad project lives in the Meisterschulen-am-Ostbahnhof-Munchen/JC8012P4A1C_I_W_Y_CAN repository on GitHub; these links point at the commit this page was built from.

JC8012P4A1C backplate: common questions

How big is the JC8012P4A1C backplate PCB?

The JC8012P4A1C backplate measures 242.8 × 158.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the JC8012P4A1C backplate?

4 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the JC8012P4A1C backplate design files?

From the Meisterschulen-am-Ostbahnhof-Munchen/JC8012P4A1C_I_W_Y_CAN repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the JC8012P4A1C backplate design in my own project?

Yes, under the terms of its GPL-3.0 license, which Meisterschulen-am-Ostbahnhof-Munchen chose for the repository.

More boards in JC8012P4A1C_I_W_Y_CAN