Kicker
About the Kicker PCB
Kicker is an open source PCB design by MelissaKt, published on GitHub. It is a 2-layer board measuring 23.7 × 48.9 mm, with 7 components from 7 distinct parts.
Other key parts include the STPS80170CW. By type, the board carries 2 connectors, 1 IC, 1 transistor, 1 LED, 1 capacitor and 1 resistor.
From the project
The official i-bots Soccer 2vs2 open mainpage
Main components on the Kicker
Kicker bill of materials (BOM)
7 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STPS80170CW | TO545P515X1560X2445-3P | IC1 |
| 1 | ISC009N06LM5ATMA1 | BSC021N08NS5ATMA1 | Q1 |
| 1 | Conn_01x02_Pin | mp012928 | J4 |
| 1 | xt30 | AMASS_MR30PW-M_1x03_P3.50mm_Horizontal | J19 |
| 1 | SMLD12EN1WT86C | SMLD12EN1WT86C | LED1 |
| 1 | ALC80A392BD063 | CAPPRD1000W210D2550H4200 | C1 |
| 1 | R | R_LDR_D13.8mm_P9.0mm_Vertical | R1 |
Kicker design files
The KiCad project lives in the MelissaKt/i-bots_soccer repository on GitHub; these links point at the commit this page was built from.
Kicker: common questions
How big is the Kicker PCB?
The Kicker measures 23.7 × 48.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kicker?
7 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kicker design files?
From the MelissaKt/i-bots_soccer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Kicker design in my own project?
The repository has no license, so all rights stay with MelissaKt. Use it as a reference, and ask the author before reusing the design.
