Openrz67
mhellevang·openrz67·kicad/openrz67-nrf.kicad_pcb
About the Openrz67 PCB
Openrz67 is an open source PCB design by mhellevang, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 29.5 × 29 mm, with 15 components from 12 distinct parts.
Other key parts include the E73-2G4M08S1F and TLP172AM(TPL,E). By type, the board carries 3 ICs, 3 capacitors, 3 resistors, 2 connectors, 1 transistor and 1 battery holder.
It belongs with the iot & wireless designs in this gallery.
From the project
Bluetooth remote release for the Mamiya RZ67: ESP32-C3 firmware, KiCad PCB and enclosure. Shutter, bulb and countdown from your phone.
KiCad 10 project for the coin-cell trigger: 29.5 × 29 mm, 2 layers, Ebyte E73-2G4M08S1F (nRF54L15) module, CR2032 clip on the back, two TLP172AM PhotoMOS relays, JST SH 1.0 mm side-entry camera connector, a second SH connector for SWD, one button, one LED, a P-MOSFET against a reversed cell. No regulator, no charger, no power switch. Rev A is built and works with two workarounds; the source here is rev B, not ordered. Fab packages that were sent are in archive/.
Main components on the Openrz67
Openrz67 bill of materials (BOM)
15 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | E73-2G4M08S1F Ebyte | WIRELM-SMD_E73-2G4M08S1F | U1 |
| 2 | TLP172AM(TPL,E) TLP172AM TOSHIBA | SMD-4_L4.6-W3.7-P2.54-LS7.0-BR | U2, U3 |
| 1 | AO3401A Alpha & Omega Semicon | SOT-23 | Q1 |
| 1 | SM04B-SRSS-TB(LF)(SN) Camera JST | CONN-SMD_4P-P1.00_SM04B-SRSS-TB-LF-SN | J1 |
| 1 | SM04B-SRSS-TB(LF)(SN) SWD JST | CONN-SMD_4P-P1.00_SM04B-SRSS-TB-LF-SN | J2 |
| 1 | MY-2032-16 CR2032 MYOUNG | BAT-SMD_MY-2032-16 | BT1 |
| 1 | B3U-1000P OMRON | KEY-SMD_B3U-1000PM | SW1 |
| 1 | KT-0603R LED KENTO | LED0603-RD | D1 |
| 1 | CL31A107MQHNNNE 100uF Samsung | C1206 | C1 |
| 2 | CL05B104KO5NNNC 100nF Samsung | C0402 | C2, C3 |
| 2 | 0402WGF2200TCE 220Ω UNI-ROYAL | R0402 | R1, R2 |
| 1 | 0402WGF1001TCE 1kΩ UNI-ROYAL | R0402 | R3 |
Openrz67 design files
The KiCad project lives in the mhellevang/openrz67 repository on GitHub; these links point at the commit this page was built from.
Openrz67: common questions
How big is the Openrz67 PCB?
The Openrz67 measures 29.5 × 29 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Openrz67?
15 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Openrz67 design files?
From the mhellevang/openrz67 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Openrz67 design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which mhellevang chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kL0 USB
Luos-io
20.3 × 15.3 mm19 parts2LMIT547Breakout board
Luos-io
26.7 × 27.9 mm29 parts2LMIT547Stm32f0 disco Luos shield
Luos-io
55.9 × 99.1 mm26 parts2LMIT547L0 USBA
Luos-io
20.3 × 15.3 mm19 parts2LMIT547