LEd Torch
About the LEd Torch PCB
LEd Torch is an open source PCB design by michaelgranberryii, published on GitHub. It is a 2-layer board measuring 65.5 × 24.8 mm, with 4 components from 4 distinct parts.
By type, the board carries 1 battery holder, 1 switch, 1 diode and 1 resistor.
LEd Torch bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Battery | BatteryHolder_Keystone_1058_1x2032 | BT1 |
| 1 | SW_DPST_x2 | SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
LEd Torch design files
The KiCad project lives in the michaelgranberryii/pcb-design-with-kicad-updated-for-kicad-7 repository on GitHub; these links point at the commit this page was built from.
LEd Torch: common questions
How big is the LEd Torch PCB?
The LEd Torch measures 65.5 × 24.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LEd Torch?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the LEd Torch design files?
From the michaelgranberryii/pcb-design-with-kicad-updated-for-kicad-7 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LEd Torch design in my own project?
The repository has no license, so all rights stay with michaelgranberryii. Use it as a reference, and ask the author before reusing the design.
