F PANEL Shim
About the F PANEL Shim PCB
F PANEL Shim is an open source PCB design by mikegoelzer, published on GitHub. It is a 2-layer board measuring 26 × 56.9 mm, with 4 components from 4 distinct parts.
It belongs with the keyboards designs in this gallery.
From the project
USB dongle for remote emulation of USB HID keyboard and other server board control signals
This project is the hardware and firmware for an ESP32-based remote USB keyboard. It's a dongle that plugs into a USB port on a computer and sends keystrokes that it receives over Wifi. The connector J3 also allows for wiring up to the PC motherboard's FPANEL` control pins, allowing for remote on/off and remote reboot.
If you run a JST 4-conductor wire to FPANEL` there is a small adapter PCB that plugs it into the motherboard connector.
F PANEL Shim bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BM04B-SRSS-TB(LF)(SN) BM04B-SRSS-TB Molex | JST SH - BM04B-SRSS-TB_LFSN_ | J1 |
| 1 | 10118193-0001LF SAMTEC-SMH-110-02-X-D Amphenol | SAMTEC-SMH-110-02-X-D | J2 |
| 1 | BM04B-SRSS-TB SAMTEC-TSM-110-02-L-DH JST | SAMTEC_TSM-110-02-L-DH | J3 |
| 1 | VAL** | mouse-bite-2.54mm-slot | mouse-bite-2.54mm-slot |
F PANEL Shim design files
The KiCad project lives in the mikegoelzer/ESP32-Remote-USB-HID repository on GitHub; these links point at the commit this page was built from.
F PANEL Shim: common questions
How big is the F PANEL Shim PCB?
The F PANEL Shim measures 26 × 56.9 mm, has 2 copper layers and is 1.64592 mm thick.
How many components are on the F PANEL Shim?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the F PANEL Shim design files?
From the mikegoelzer/ESP32-Remote-USB-HID repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the F PANEL Shim design in my own project?
The repository has no license, so all rights stay with mikegoelzer. Use it as a reference, and ask the author before reusing the design.
byrantech
google