Bot buddy

milanpatel9·bot-buddy·botbuddy-pcb/exercisefour_milanhp2.kicad_pcb

Bot buddy PCB layout, top view — open source STM32 board by milanpatel9

About the Bot buddy PCB

Bot buddy is an open source STM32 PCB design by milanpatel9, published on GitHub. It is a 2-layer board measuring 53.3 × 40.6 mm, with 14 components from 10 distinct parts.

Its main chip is the STM32L031K6Tx, from the STM32 family. By type, the board carries 1 inductor and 1 resistor.

It belongs with the iot & wireless, robotics & motion and power & battery designs in this gallery.

From the project

BotBuddy is a remote-controlled tank platform developed to explore embedded systems, motor control, and wireless communication. Built from the ground up in 2023, this project integrates real-time control, sensor feedback, and a mobile input interface to create a responsive roboti

BotBuddy is a remote-controlled tank platform developed to explore embedded systems, motor control, and wireless communication. Built from the ground up in 2023, this project integrates real-time control, sensor feedback, and a mobile input interface to create a responsive robotics experience.

- 🎮 Remote Control: Receives movement commands via Bluetooth from a custom mobile controller interface. - ⚙️ Motor Control: Dual motor setup for differential steering using PWM signals. - 🔋 Battery Powered: Runs on an onboard power supply for wireless mobility. - 🧭 Sensor Integration (optional)…

Bot buddy bill of materials (BOM)

14 components, 10 distinct parts.

QtyPartRefs
5
0.1uF
COutReset1, Cout1, Cout2, Cout3, Cout5
1
Conn_01x03
I2C1
1
Conn_01x02
Power_Input1
1
SW_Push
PushButton1
1
Conn_01x04_Male
Receiver1
1
Conn_02x05_Odd_Even
STLinkV2Programmer1
1
STM32L031K6Tx
STM1
1
Conn_01x06
USBSerialPort-TTLAdapter1
1
Conn_02x04_Odd_Even
L298N1
1
R2
R2

Bot buddy design files

The KiCad project lives in the milanpatel9/bot-buddy repository on GitHub; these links point at the commit this page was built from.

Bot buddy: common questions

What microcontroller does the Bot buddy use?

The Bot buddy is built around the STM32L031K6Tx, from the STM32 family.

How big is the Bot buddy PCB?

The Bot buddy measures 53.3 × 40.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Bot buddy?

14 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the Bot buddy design files?

From the milanpatel9/bot-buddy repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Bot buddy design in my own project?

The repository has no license, so all rights stay with milanpatel9. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Bot buddy without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards