AddOnD
About the AddOnD PCB
AddOnD is an open source PCB design by mischuja, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 186 × 36 mm, with 81 components from 31 distinct parts.
By type, the board carries 56 resistors, 16 capacitors and 9 crystals.
From the project
- 1x XLR Analog in - 1x RCA Analog in - 1x TOSlink in (for S/P-DIF via glassfiber) - 1x RCA Digital in (for S/P-DIF via coaxial cable) - 1x RCA Digital out (connect a subwoofer) - 1x XLR Analog Out (connect a subwoofer) - 1x USB - Volume potentiometer
- 1x XLR Analog in - 1x RCA Analog in - 1x TOSlink in (for S/P-DIF via glassfiber) - 1x RCA Digital in (for S/P-DIF via coaxial cable) - 1x RCA Digital out (connect a subwoofer) - 1x XLR Analog Out (connect a subwoofer) - 1x USB - Volume potentiometer
Schematics and backplates v1.0.0 Schematics and backplates
Pre-amp / 7.1-management without limits.
- 8x XLR Analog Out, unbalanced (RCA) is possible too - 8x RCA Analog In - 8x XLR Analog In - 4x RCA Digital In (for S/P-DIF via Cinch) - 4x TOSlink Digital In ((for S/P-DIF via LWL) - 1x USB in
AddOnD bill of materials (BOM)
81 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1-215079-4 XLR3 TE Connectivity AMP Connectors | NC3FAH | X101 |
| 1 | PRPC008DAAN-RC XLR3 Sullins Connector Solutions | NC3FAH | X102 |
| 1 | PRPC003SAAN-RC XLR3 Sullins Connector Solutions | NC3FAH | X103 |
| 1 | 1-215079-0 XLR3 TE Connectivity AMP Connectors | NC3FAH | X104 |
| 1 | 0430450428 XLR3 Molex, LLC | NC3FAH | X105 |
| 3 | XLR3 | NC3FAH | X106, X107, X108 |
| 1 | CON_IDC26 | IDC26 | X109 |
| 5 | GRM21BR61E106MA73L CAP_100p_50V_C0G_NP0_0805 Murata Electronics North America | C0805-X7R | C101, C104, C111, C112, C114 |
| 5 | C0805C104K5RACTU CAP_100p_50V_C0G_NP0_0805 KEMET | C0805-X7R | C102, C105, C109, C110, C113 |
| 1 | CC0805KRX7R9BB562 CAP_100p_50V_C0G_NP0_0805 Yageo | C0805-X7R | C103 |
| 1 | C0805C151J5GACTU CAP_100p_50V_C0G_NP0_0805 KEMET | C0805-X7R | C106 |
| 2 | C0805C220J5GACTU CAP_100p_50V_C0G_NP0_0805 KEMET | C0805-X7R | C107, C108 |
| 2 | 860010474012 CAP_100p_50V_C0G_NP0_0805 Wurth Electronics Inc. | C0805-X7R | C115, C116 |
| 2 | TC164-JR-0733RL RES_100R_1%_0.25W_Thin_0805 Yageo | C0805-RES | R101, R105 |
| 2 | TC164-JR-0733RL RES_100K_1%_0.125W_Thick_0805 Yageo | C0805-RES | R102, R104 |
| 1 | RC0805FR-071KL RES_100R_1%_0.25W_Thin_0805 Yageo | C0805-RES | R103 |
| 1 | RC0805FR-074K32L RES_100K_1%_0.125W_Thick_0805 Yageo | C0805-RES | R106 |
| 2 | RC0805FR-0710KL RES_100R_1%_0.25W_Thin_0805 Yageo | C0805-RES | R107, R113 |
| 1 | RC0805FR-07100RL RES_100K_1%_0.125W_Thick_0805 Yageo | C0805-RES | R108 |
| 1 | RC0805FR-0733RL RES_100R_1%_0.25W_Thin_0805 Yageo | C0805-RES | R109 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RC0805FR-072KL RES_100K_1%_0.125W_Thick_0805 Yageo | C0805-RES | R110 |
| 1 | RC0805FR-072KL RES_100R_1%_0.25W_Thin_0805 Yageo | C0805-RES | R111 |
| 1 | RC0805FR-0710KL RES_100K_1%_0.125W_Thick_0805 Yageo | C0805-RES | R112 |
| 1 | RC0805FR-071KL RES_100K_1%_0.125W_Thick_0805 Yageo | C0805-RES | R114 |
| 1 | RC0805FR-07100KL RES_100R_1%_0.25W_Thin_0805 Yageo | C0805-RES | R115 |
| 1 | RNCP0805FTD150R RES_100K_1%_0.125W_Thick_0805 Stackpole Electronics Inc. | C0805-RES | R116 |
| 1 | RC0805FR-07931RL RES_100R_1%_0.25W_Thin_0805 Yageo | C0805-RES | R117 |
| 8 | RES_100K_1%_0.125W_Thick_0805 | C0805-RES | R118, R120, R122, R124, R126, R128, R130, R132 |
| 7 | RES_100R_1%_0.25W_Thin_0805 | C0805-RES | R119, R121, R123, R125, R127, R129, R131 |
| 16 | RES_7K87_0.5%_0.100W_Thin_0805 | C0805-RES | R133, R135, R136, R138, R139, R141, R142, R144 +8 |
| 8 | RES_5K11_0.5%_0.100W_Thin_0805 | C0805-RES | R134, R137, R140, R143, R146, R149, R152, R155 |
AddOnD design files
The KiCad project lives in the mischuja/SigmaDSP repository on GitHub; these links point at the commit this page was built from.
AddOnD: common questions
How big is the AddOnD PCB?
The AddOnD measures 186 × 36 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AddOnD?
81 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AddOnD design files?
From the mischuja/SigmaDSP repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the AddOnD design in my own project?
Yes, under the terms of its GPL-3.0 license, which mischuja chose for the repository.
