Pmod rgmii
About the Pmod rgmii PCB
Pmod rgmii is an open source PCB design by mithro, published on GitHub. It is a 2-layer board measuring 57.1 × 83.8 mm, with 66 components from 26 distinct parts.
Other key parts include the MCP1825, 24AA02E48 and RTL8211E-VB. By type, the board carries 29 resistors, 27 capacitors, 3 ICs, 3 inductors, 2 connectors and 1 crystal.
Main components on the Pmod rgmii
Pmod rgmii bill of materials (BOM)
66 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1825 | SOT223-5 | U1 |
| 1 | 24AA02E48 | So8_24aao2e48 | U2 |
| 1 | RTL8211E-VB | QFN48(RTL8211E) | U3 |
| 1 | 50MHz | HC-49V | X1 |
| 1 | RJ45(HFJ11-1GO1ERL) | RJ45_10P-10C | J1 |
| 1 | HIROSE_120PIN | FX18_120_RCPT | P1 |
| 1 | P*** | MH-4MM | 1PIN |
| 3 | INDUCTOR | SM0805 | L1, L2, L3 |
| 1 | 4.7uF | SM0805 | C1 |
| 15 | 100nF | SM0603_Capa | C2, C3, C8, C9, C13, C14, C15, C16 +7 |
| 1 | 1uF | SM0805 | C4 |
| 6 | 4.7uF | SM0603_Capa | C5, C6, C7, C10, C11, C12 |
| 2 | 12pF | SM0603_Capa | C17, C18 |
| 1 | 27pF | SM0603_Capa | C19 |
| 1 | 0.1uF | SM0603_Capa | C20 |
| 1 | 1K | SM0603_Resistor | R1 |
| 1 | 0R | SM0402_r | R2 |
| 1 | 39K | SM0603_Resistor | R4 |
| 1 | 27K | SM0603_Resistor | R5 |
| 8 | 0R | SM0603_Resistor | R6, R8, R9, R10, R11, R12, R13, R21 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | 4.7K | SM0603_Resistor | R14, R15, R16, R17, R18, R20, R26, R28 +1 |
| 1 | 1.5K | SM0603_Resistor | R19 |
| 1 | 2.49K | SM0603_Resistor | R22 |
| 2 | 10K | SM0603_Resistor | R23, R24 |
| 2 | 390R | SM0603_Resistor | R25, R27 |
| 2 | 330R | SM0603_Resistor | R30, R31 |
Pmod rgmii design files
The KiCad project lives in the mithro/pmod-rgmii repository on GitHub; these links point at the commit this page was built from.
Pmod rgmii: common questions
How big is the Pmod rgmii PCB?
The Pmod rgmii measures 57.1 × 83.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pmod rgmii?
66 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pmod rgmii design files?
From the mithro/pmod-rgmii repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Pmod rgmii design in my own project?
The repository has no license, so all rights stay with mithro. Use it as a reference, and ask the author before reusing the design.