Pixel-Star
mjack3k·Pixel-Star·kicad/Pixel_Star.kicad_pcb
About the Pixel-Star PCB
Pixel-Star is an open source STM32 PCB design by mjack3k, published on GitHub under the MIT license. It is a 2-layer board measuring 95.3 × 91.1 mm, with 55 components from 15 distinct parts.
Its main chip is the STM32G030F6P6TR, from the STM32 family. Other key parts include the AMS1117-3.3 and SN74LV1T34DBVR. By type, the board carries 20 capacitors, 16 diodes, 11 resistors, 3 ICs, 3 switches and 2 connectors.
From the project
Star-shaped PCB with addressable RGB-LEDs running different animations
With this project you can make a simple yet nice star-shaped PCB with a bunch of addressable LEDs.
It has STM32 microcontroller on board and this project provides software for it to drive the LEDs.
1. Download KiCAD 6, STM32CubeIDE, clone/download this project 2. Generate Gerber files according to your manufarcturer rules (for example JLCPCB) 3. Order the PCB 4. Order the parts (Kicad project contains links to all parts on lcsc) 5. Solder everything 6. Compile the STM32 project 7. Flash the firmware using ST-Link

Main components on the Pixel-Star
Pixel-Star bill of materials (BOM)
55 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32G030F6P6TR | STM32G030F6P6TR | U2 |
| 1 | SN74LV1T34DBVR | SOT95P280X145-5N | U3 |
| 1 | USB_C_Female | USB_C_Female | J1 |
| 1 | Conn_01x04_Female | Molex_PicoBlade_53261-0471_1x04-1MP_P1.25mm_Horizontal | J2 |
| 3 | SW_Push | K2-1107ST-A4DW-06 | SW1, SW2, SW3 |
| 11 | WS2813 | LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm | D1, D2, D3, D4, D5, D6, D7, D8 +3 |
| 5 | BLUE_LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D12, D13, D14, D15, D16 |
| 17 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C5, C6, C7, C9, C10 +9 |
| 2 | 10µF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C8 |
| 1 | 4.7µF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C19 |
| 2 | 5.11k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5 |
| 2 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R6 |
| 5 | R_Small | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R8, R9, R10, R11 |
Pixel-Star design files
The KiCad project lives in the mjack3k/Pixel-Star repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/Pixel_Star.kicad_pcb
- Schematickicad/Pixel_Star.kicad_sch
Pixel-Star: common questions
What microcontroller does the Pixel-Star use?
The Pixel-Star is built around the STM32G030F6P6TR, from the STM32 family.
How big is the Pixel-Star PCB?
The Pixel-Star measures 95.3 × 91.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pixel-Star?
55 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pixel-Star design files?
From the mjack3k/Pixel-Star repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pixel-Star design in my own project?
Yes, under the terms of its MIT license, which mjack3k chose for the repository.
Can I test firmware for the Pixel-Star without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k