I2CSPI01

mlab-modules·I2CSPI01·hw/sch_pcb/I2CSPI01.kicad_pcb

I2CSPI01 PCB layout, top view — open source board by mlab-modules

About the I2CSPI01 PCB

I2CSPI01 is an open source PCB design by mlab-modules, published on GitHub. It is a 2-layer board measuring 30 × 40.1 mm, with 18 components from 11 distinct parts.

Other key parts include the SC18IS602B. By type, the board carries 7 connectors, 7 resistors, 2 capacitors, 1 IC and 1 diode.

From the project

Allows connection of SPI devices to I2C bus and is capable co handle up to four SPI slaves. Not used chip-select pins can be used as GPIO pins.

The I2CSPI01 module is designed for systems where a microcontroller with only an I2C interface needs to communicate with one or more SPI peripherals. It acts as a bridge that translates I2C commands into SPI signals, allowing integration of SPI devices such as ADCs, DACs, memory chips, or sensors into an I2C-based architecture. This simplifies wiring and reduces the number of required signals.

I2CSPI01, from the project README
From the project README

Main components on the I2CSPI01

I2CSPI01 bill of materials (BOM)

18 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SC18IS602B
U1
2
JUMP_3X2
J1, J4
1
JUMP_5X2
J2
1
JUMP_7X2
J3
3
CONN_2
J5, J6, J7
1
BZV55C-3,6V
D1
1
100NF
100nF
C1
1
10UF
10uF
C2
5
10K
10k
R1, R2, R4, R6, R7
1
0R
R3
1
-
R5

I2CSPI01 design files

The KiCad project lives in the mlab-modules/I2CSPI01 repository on GitHub; these links point at the commit this page was built from.

I2CSPI01: common questions

How big is the I2CSPI01 PCB?

The I2CSPI01 measures 30 × 40.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the I2CSPI01?

18 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the I2CSPI01 design files?

From the mlab-modules/I2CSPI01 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the I2CSPI01 design in my own project?

The repository has no license, so all rights stay with mlab-modules. Use it as a reference, and ask the author before reusing the design.