STM32TQ6401

mlab-modules·STM32TQ6401·hw/sch_pcb/STM32TQ6401.kicad_pcb

STM32TQ6401 PCB layout, top view — open source STM32 board by mlab-modules

About the STM32TQ6401 PCB

STM32TQ6401 is an open source STM32 PCB design by mlab-modules, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 50.3 × 91.2 mm, with 45 components from 25 distinct parts.

Its main chip is the STM32_UNIVERSAL, from the STM32 family. Other key parts include the MCP1825S-3302E/DB and TPS2051BDBVRG4. By type, the board carries 19 capacitors, 10 connectors, 4 ICs, 3 resistors, 2 crystals and 2 switches.

It belongs with the power & battery designs in this gallery.

From the project

STM32 in TQFP64 packages

The STM32TQ6401 is a universal microcontroller module designed for STM32 MCUs in TQFP64 packages. It offers a flexible platform for both development and deployment, with support for a wide range of STM32 devices and power configurations.

- Compatible with most STM32 MCUs in TQFP64 package (see note in schematics for exceptions) - Direct battery operation from a CR2032 cell - USB-C connector for both programming and external power input - Standard MLAB pin headers for module interconnection to other MLAB modules - Onboard 32.768 kHz and 16 MHz crystal oscillators for RTC and system clock -…

STM32TQ6401, from the project README
From the project README

Main components on the STM32TQ6401

STM32_UNIVERSALMCP1825S-3302E/DBTPS2051BDBVRG4

STM32TQ6401 bill of materials (BOM)

45 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32_UNIVERSAL
U1
1
MCP1825S-3302E/DB
U2
1
TPS2051BDBVRG4
U3
1
MCP1825S-3302E/DB
U4
1
32768HZ
32768Hz
Y1
1
16MHZ
16MHz
Y2
4
JUMP_02x16
J1, J2, J3, J4
1
JUMP_2X3
JUMP_2x3
J5
1
WUERTH_629105150521
Wuerth_629105150521
J6
3
JUMP_01x02
J7, J8, J10
1
JUMP_01X06
JUMP_01x06
J9
1
2032
BT1
1
Polyfuse
F1
2
SW_Push
SW1, SW2
1
M7-DCO
D1
1
B130-13-F
D2
1
100R
L1
10
100nF
C1, C2, C4, C5, C12, C13, C15, C16 +2
3
2u2/10V
C3, C10, C11
2
22pF
C6, C7
Show 5 more
QtyPartRefs
2
10pF
C8, C9
1
10UF
10uF
C14
1
2U2
2u2
C19
2
1k
R1, R2
1
10K
10k
R3

STM32TQ6401 design files

The KiCad project lives in the mlab-modules/STM32TQ6401 repository on GitHub; these links point at the commit this page was built from.

STM32TQ6401: common questions

What microcontroller does the STM32TQ6401 use?

The STM32TQ6401 is built around the STM32_UNIVERSAL, from the STM32 family.

How big is the STM32TQ6401 PCB?

The STM32TQ6401 measures 50.3 × 91.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32TQ6401?

45 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32TQ6401 design files?

From the mlab-modules/STM32TQ6401 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32TQ6401 design in my own project?

Yes, under the terms of its GPL-3.0 license, which mlab-modules chose for the repository.

Can I test firmware for the STM32TQ6401 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards