SmartMeter
About the SmartMeter PCB
SmartMeter is an open source PCB design by MNasser-iono, published on GitHub. It is a 2-layer board measuring 100.6 × 207.3 mm, with 56 components from 19 distinct parts.
Other key parts include the MOC3063M. By type, the board carries 21 resistors, 9 ICs, 9 capacitors, 7 transistors, 6 connectors and 1 fuse.
Main components on the SmartMeter
SmartMeter bill of materials (BOM)
56 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | Energy_meter | U1 |
| 7 | MOC3063M | DIP-6_W7.62mm | U2, U3, U4, U5, U6, U7, U8 |
| 1 | ~ | AC_filter | U9 |
| 7 | BTA41-600 | TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 1 | Energy_Meter_Conn | RC4 | J1 |
| 1 | Control_Terminal | RC8 | J2 |
| 1 | Loads | RPC10 | J3 |
| 1 | PV | RPC2 | J4 |
| 1 | AC_Input | RPC2 | J5 |
| 1 | DC_out | RC2 | J6 |
| 1 | Fuse | Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | HLK-5M12 | Converter_ACDC_Hi-Link_HLK-5Mxx | PS1 |
| 1 | 10D561 | RV_Disc_D15.5mm_W7.5mm_P7.5mm | RV1 |
| 1 | L_Coupled_1324 | L_CommonMode_Wuerth_WE-CMB-M | L1 |
| 1 | 0.1uF/275V | C_Rect_L18.0mm_W5.0mm_P15.00mm_FKS3_FKP3 | C1 |
| 1 | 220uF | C_Radial_D8.0mm_H11.5mm_P3.50mm | C2 |
| 7 | 0.01µF | C_Disc_D7.5mm_W5.0mm_P10.00mm | C3, C4, C5, C6, C7, C8, C9 |
| 14 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R4, R5, R7, R8, R10, R11 +6 |
| 7 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R6, R9, R12, R15, R18, R21 |
SmartMeter design files
The KiCad project lives in the MNasser-iono/SmartMeter repository on GitHub; these links point at the commit this page was built from.
- Layoutsmart meter.kicad_pcb
- Schematicsmart meter.kicad_sch
SmartMeter: common questions
How big is the SmartMeter PCB?
The SmartMeter measures 100.6 × 207.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SmartMeter?
56 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the SmartMeter design files?
From the MNasser-iono/SmartMeter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SmartMeter design in my own project?
The repository has no license, so all rights stay with MNasser-iono. Use it as a reference, and ask the author before reusing the design.