HardLabs

AdvancePACsystemHardware

MohammedSciUp·AdvancePACsystemHardware·SOM/power_mcu.kicad_sch

This repository ships a schematic but no board layout.

About the AdvancePACsystemHardware PCB

AdvancePACsystemHardware is an open source STM32 PCB design by MohammedSciUp, published on GitHub. It is a board, with 29 components from 6 distinct parts.

Its main chip is the STM32H7S3L8H6, from the STM32 family. By type, the board carries 28 capacitors and 1 IC.

From the project

Advance_850MHZ_PAC_system_Hardware

Main components on the AdvancePACsystemHardware

STM32H7S3L8H6

AdvancePACsystemHardware bill of materials (BOM)

29 components, 6 distinct parts.

QtyPartRefs
1
STM32H7S3L8H6
IC1
12
100nF
C1, C2, C3, C4, C5, C6, C7, C8 +4
1
4.7uF
C10
5
1uF
C12, C14, C20, C21, C26
3
2.2uF
C16, C17, C18
7
100uF
C19, C22, C23, C24, C25, C27, C28

AdvancePACsystemHardware design files

The KiCad project lives in the MohammedSciUp/AdvancePACsystemHardware repository on GitHub; these links point at the commit this page was built from.

AdvancePACsystemHardware: common questions

What microcontroller does the AdvancePACsystemHardware use?

The AdvancePACsystemHardware is built around the STM32H7S3L8H6, from the STM32 family.

How many components are on the AdvancePACsystemHardware?

29 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the AdvancePACsystemHardware design files?

From the MohammedSciUp/AdvancePACsystemHardware repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the AdvancePACsystemHardware design in my own project?

The repository has no license, so all rights stay with MohammedSciUp. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the AdvancePACsystemHardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards