Cc11xx
About the Cc11xx PCB
Cc11xx is an open source PCB design by mossmann, published on GitHub under the GPL-2.0 license. It is a board measuring 22.5 × 12 mm, with 62 components from 35 distinct parts.
Other key parts include the CC1111, AP7313, USB2412, AP2511SN-7 and AH1806. By type, the board carries 28 capacitors, 16 resistors, 8 connectors, 5 ICs, 2 crystals and 1 transformer.
From the project
Hardware designs for CC11xx
TURNIPSCHOOL - An open source reimagining of COTTONMOUTH-I
This is an experimental design for a USB hub + CC1111 dongle hidden within a USB plug. It is intended to work with RfCat: https://bitbucket.org/atlas0fd00m/rfcat
TURNIPSCHOOL is part of the NSA Playset: http://www.nsaplayset.org/turnipschool
This design was made with KiCad: http://www.kicad-pcb.org/
order of copper layers: Copper 1: C1F (front) Copper 2: C2 Copper 3: C3 Copper 4: C1B (back)
Main components on the Cc11xx
Cc11xx bill of materials (BOM)
62 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CC1111 | GSG-QFN36 | U1 |
| 1 | AP7313 | GSG-SOT23-3 | U2 |
| 1 | USB2412 | GSG-QFN28 | U3 |
| 1 | AP2511SN-7 | GSG-U-DFN2020-6 | U4 |
| 1 | AH1806 | GSG-SOT553 | U5 |
| 2 | GSG-XTAL4PIN | GSG-XTAL2.0x1.6mm | X1, X2 |
| 1 | USB-DEVICE-SHIELD | GSG-USB-A-1001-010-01001-SHIELD | J1 |
| 1 | CONN_1 | GSG-50MIL-HEADER-1x1-TH | P1 |
| 1 | RESET_N | GSG-TESTPOINT-50MIL | P2 |
| 1 | DD | GSG-TESTPOINT-50MIL | P3 |
| 1 | DC | GSG-TESTPOINT-50MIL | P4 |
| 1 | 3V3 | GSG-TESTPOINT-50MIL | P5 |
| 1 | GND | GSG-TESTPOINT-50MIL | P6 |
| 1 | CABLE | GSG-50MIL-HEADER-1x5-TH | P7 |
| 1 | BALUN | GSG-B0310J50100AHF | T1 |
| 1 | LED1 | GSG-0603D | D1 |
| 1 | FILTER | GSG-0805 | FB1 |
| 3 | 1uF | GSG-0402 | C1, C13, C19 |
| 13 | 100nF | GSG-0402 | C2, C3, C12, C17, C18, C20, C21, C22 +5 |
| 1 | 220pF | GSG-0402 | C4 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 10nF | GSG-0402 | C5, C6, C7, C8 |
| 1 | 2p2 | GSG-0402 | C9 |
| 2 | 22pF | GSG-0402 | C10, C11 |
| 1 | 4u7 | GSG-0402 | C14 |
| 2 | 18pF | GSG-0402 | C15, C16 |
| 1 | 47uF | GSG-0805 | C27 |
| 1 | 10k | GSG-0402 | R1 |
| 1 | 56k | GSG-0402 | R2 |
| 2 | 330 | GSG-0402 | R3, R7 |
| 2 | 33 | GSG-0402 | R4, R5 |
| 5 | 100k | GSG-0402 | R6, R10, R12, R13, R14 |
| 1 | 1M | GSG-0402 | R8 |
| 1 | 12k | GSG-0402 | R9 |
| 2 | 50k | GSG-0402 | R11, R15 |
| 1 | 1.5k | GSG-0402 | R17 |
Cc11xx design files
The KiCad project lives in the mossmann/cc11xx repository on GitHub; these links point at the commit this page was built from.
Cc11xx: common questions
How big is the Cc11xx PCB?
The Cc11xx measures 22.5 × 12 mm and is 1.6002 mm thick.
How many components are on the Cc11xx?
62 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cc11xx design files?
From the mossmann/cc11xx repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Cc11xx design in my own project?
Yes, under the terms of its GPL-2.0 license, which mossmann chose for the repository.