Portable Voltage Standard

MPlasson·Portable-Voltage-Standard·electronics/mainboard/PortableVoltageStandard.kicad_pcb

Portable Voltage Standard PCB layout, top view — open source board by MPlasson

About the Portable Voltage Standard PCB

Portable Voltage Standard is an open source PCB design by MPlasson, published on GitHub under the MIT license. It is a 2-layer board measuring 79.5 × 60 mm, with 34 components from 24 distinct parts.

Other key parts include the REF7050, NCS333 and LM4040DBZ-2.5. By type, the board carries 12 resistors, 8 capacitors, 3 ICs, 3 transistors, 3 connectors and 3 diodes.

From the project

Portable voltage reference module, based on the REF7050 chip from Ti

- Stable 5V output with high accuracy (< 0.025%) - Very low temperature coefficient (< 2ppm/°C) - Battery powered for lowest noise & portability - Power Good LED indicator - Low Battery LED indicator

- [x] Initial bringup - [ ] Line regulation - [ ] Load regulation - [x] Current consumption - [ ] Low battery LED trigger voltage - [x] Ambient temperature accuracy - [x] Temperature drift [20°C - 50°C] - [ ] Output stability (100h minimum)

Portable Voltage Standard, from the project README
From the project README

Main components on the Portable Voltage Standard

Portable Voltage Standard bill of materials (BOM)

34 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
REF7050
U1
1
NCS333
U2
1
LM4040DBZ-2.5
U3
2
AP2302B
Q1, Q2
1
AP2301B
Q3
1
C7437326
OUTF
J1
1
C7437327
GND
J3
1
AUX_POWER
J4
1
9V_BATTERY
9V_Battery
BT1
1
C278409
SW_Push_SPDT
SW1
1
K14
D1
1
C7470717
LOW_VOLTAGE
D2
1
C7433083
POWER_GOOD
D3
4
100NF
100nF
C1, C2, C5, C6
2
22UF
22uF
C3, C7
1
10UF
10uF
C4
1
1UF
1uF
C8
1
33K
33k
R1
1
470K
470k
R2
1
100K
100k
R3
Show 4 more
QtyPartRefs
2
1MEG
1Meg
R4, R10
2
300K
300k
R5, R6
3
100
R7, R11, R12
2
1k
R8, R9

Portable Voltage Standard design files

The KiCad project lives in the MPlasson/Portable-Voltage-Standard repository on GitHub; these links point at the commit this page was built from.

Portable Voltage Standard: common questions

How big is the Portable Voltage Standard PCB?

The Portable Voltage Standard measures 79.5 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Portable Voltage Standard?

34 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Portable Voltage Standard design files?

From the MPlasson/Portable-Voltage-Standard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Portable Voltage Standard design in my own project?

Yes, under the terms of its MIT license, which MPlasson chose for the repository.