Treasure box frontpanel
mtrunzo12·TreasureBox-build·treasure_box_frontpanel/treasure_box_frontpanel.kicad_pcb
About the Treasure box frontpanel PCB
Treasure box frontpanel is an open source PCB design by mtrunzo12, published on GitHub. It is a 2-layer board measuring 70 × 55 mm, with 10 components from 9 distinct parts.
By type, the board carries 3 connectors, 3 diodes, 3 resistors and 1 capacitor.
From the project
Build along with a knock-to-unlock toy chest: firmware, KiCad files, parts lists and a parent checklist.
Build a toy chest with a saved knock rhythm, keypad PIN, servo claw, lights and music. This folder is a curated snapshot of Mark and Liam's build. Start small: get the inputs working on a breadboard before ordering boards.
1. Install Claude Code or Codex, plus Arduino IDE and KiCad. 2. Download and unzip this build kit. Open the whole treasure-chest folder in your AI coding app. From GitHub, use Code → Download ZIP; no terminal or Git knowledge is required. Forking is optional and gives you your own place to save changes. 3. Paste the prompt from START-HERE.md. Ask the assistant to explain…
Treasure box frontpanel bill of materials (BOM)
10 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PANEL_IN | IDC-Header_2x08_P2.54mm_Vertical | J101 |
| 1 | KEYPAD | JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical | J102 |
| 1 | ARM_SW | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J103 |
| 1 | LED_BLUE | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | D101 |
| 1 | LED_GREEN | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | D102 |
| 1 | LED_RED | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | D103 |
| 1 | 100NF 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C101 |
| 2 | 150R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R101, R102 |
| 1 | 220R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R103 |
Treasure box frontpanel design files
The KiCad project lives in the mtrunzo12/TreasureBox-build repository on GitHub; these links point at the commit this page was built from.
Treasure box frontpanel: common questions
How big is the Treasure box frontpanel PCB?
The Treasure box frontpanel measures 70 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Treasure box frontpanel?
10 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Treasure box frontpanel design files?
From the mtrunzo12/TreasureBox-build repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Treasure box frontpanel design in my own project?
The repository has no license, so all rights stay with mtrunzo12. Use it as a reference, and ask the author before reusing the design.