Lab 10
About the Lab 10 PCB
Lab 10 is an open source PCB design by MVaugn, published on GitHub. It is a 2-layer board measuring 58.4 × 50.8 mm, with 14 components from 12 distinct parts.
By type, the board carries 5 resistors, 3 connectors, 2 transistors, 2 capacitors and 1 inductor.
From the project
Larry Lab 2024
This page and its contents are for reference only. Learn all you can from these examples, but PLEASE design your own circuits. No cheating >:(
Lab 10 bill of materials (BOM)
14 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IRF9Z24 | TO-220-3_Vertical | Q101 |
| 1 | IRF530 | TO-220-3_Vertical | Q102 |
| 1 | Conn_01x06_Socket | PinHeader_1x06_P2.54mm_Vertical | J101 |
| 2 | Output_Terminal | TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded | J102, J103 |
| 1 | 50K | 3386P1503 | RV101 |
| 1 | 820uH | L_Axial_L20.3mm_D12.7mm_P25.40mm_Horizontal_Vishay_IHA-201 | L101 |
| 1 | 100uF | CP_Radial_D10.0mm_P3.50mm | C101 |
| 1 | 10uF | CP_Radial_D5.0mm_P2.50mm | C102 |
| 2 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R101, R102 |
| 1 | 0.12R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R103 |
| 1 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R104 |
| 1 | 27K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R105 |
Lab 10 design files
The KiCad project lives in the MVaugn/ECSE_371_2024 repository on GitHub; these links point at the commit this page was built from.
Lab 10: common questions
How big is the Lab 10 PCB?
The Lab 10 measures 58.4 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lab 10?
14 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lab 10 design files?
From the MVaugn/ECSE_371_2024 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Lab 10 design in my own project?
The repository has no license, so all rights stay with MVaugn. Use it as a reference, and ask the author before reusing the design.
