V2
About the V2 PCB
V2 is an open source PCB design by nerdpol, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 40 components from 20 distinct parts.
By type, the board carries 14 connectors, 14 resistors, 6 transistors, 3 modules and 3 transformers.
From the project
Firmware and Tools for an Autonomous Glider Plane
V2 bill of materials (BOM)
40 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ACS712-5A | ACS712-Module | M1 |
| 1 | Ads1115-Mod | ADS1115-Module | M2 |
| 1 | PCF8574_EbayMod | PCF8574_Module | M3 |
| 6 | BC817-40 | SOT-23 | Q1, Q2, Q3, Q4, Q6, Q7 |
| 1 | Bat | Pin_Header_Straight_1x02_Pitch2.54mm | J1 |
| 1 | TSens+ | Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | toFC | Pin_Header_Straight_1x04_Pitch2.54mm | J3 |
| 1 | Solar | Pin_Header_Straight_1x02_Pitch2.54mm | J4 |
| 1 | TSens- | Pin_Header_Straight_1x02_Pitch2.54mm | J5 |
| 1 | Heater1 | Pin_Header_Straight_1x02_Pitch2.54mm | J6 |
| 1 | Heater2 | Pin_Header_Straight_1x02_Pitch2.54mm | J7 |
| 1 | BatSw1 | Pin_Header_Straight_1x02_Pitch2.54mm | J10 |
| 1 | BatSw2 | Pin_Header_Straight_1x02_Pitch2.54mm | J11 |
| 1 | VideoV | Pin_Header_Straight_1x02_Pitch2.54mm | J12 |
| 1 | ServoV | Pin_Header_Straight_1x02_Pitch2.54mm | J13 |
| 3 | MT3608 | MT3608_module | P1, P2, P3 |
| 3 | AO4801A | SOIC-8_3.9x4.9mm_Pitch1.27mm | T1, T2, T3 |
| 2 | 10k | R_0603_HandSoldering | R1, R2 |
| 6 | 1k | R_0603_HandSoldering | R3, R6, R7, R10, R12, R15 |
| 6 | 100k | R_0603_HandSoldering | R4, R5, R8, R9, R13, R14 |
V2 design files
The KiCad project lives in the nerdpol/soeren repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/V2/V2.kicad_pcb
V2: common questions
How big is the V2 PCB?
The V2 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the V2?
40 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the V2 design files?
From the nerdpol/soeren repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the V2 design in my own project?
The repository has no license, so all rights stay with nerdpol. Use it as a reference, and ask the author before reusing the design.
