NeuroBytes Vestibular System
NeuroTinker·NeuroBytes_Vestibular_System·HARDWARE/NeuroBytes_Vestibular_System.kicad_pcb
About the NeuroBytes Vestibular System PCB
NeuroBytes Vestibular System is an open source STM32 PCB design by NeuroTinker, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 52.3 × 46.5 mm, with 44 components from 19 distinct parts.
Its main chip is the STM32L011Gx, from the STM32 family. Other key parts include the LD3985G33R and BNO_055. By type, the board carries 12 diodes, 11 resistors, 9 capacitors, 6 connectors, 3 ICs and 2 transistors.
From the project
All NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the GPL, v3.0.
All NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the GPL, v3.0.
This repository is a continuation of the 8-bit ATtiny design called NeuroBytes v0.91. The two series are not compatible.
We encourage community involvement in our efforts, keeping in mind that hardware availability is currently quite limited. For product availability, operating guidelines, curricula, and information about NeuroTinker, LLC, head to neurotinker.com. Further technical logs are also…
Main components on the NeuroBytes Vestibular System
NeuroBytes Vestibular System bill of materials (BOM)
44 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L011Gx | ZF_IC_UFQFPN28-050 | U1 |
| 1 | LD3985G33R | ZF_SOT23-5L | U2 |
| 1 | BNO_055 | ZF_IC_28LGA | U3 |
| 2 | NPN_dual | ZF_SMD_SOT-363 | Q1, Q2 |
| 5 | JST GH 4-POS | ZF_CONN_JST_GH | P1, P2, P5, P6, P7 |
| 1 | JST GH 7-POS | ZF_CONN_JST_GH_7POS | P8 |
| 1 | SW_PUSH_TL3330AF130QG | ZF_SW_Momentary_SideMtg | SW1 |
| 12 | LED | ZF_SMD_NonPol_0402 | D1, D2, D3, D4, D5, D6, D7, D8 +4 |
| 2 | 1u0 | ZF_SMD_NonPol_0603 | C1, C4 |
| 1 | 10u | ZF_SMD_pol_1206 | C2 |
| 2 | 0u1 | ZF_SMD_NonPol_0402_cap | C3, C5 |
| 2 | 100n | ZF_SMD_NonPol_0402_cap | C6, C7 |
| 1 | 6n8 | ZF_SMD_NonPol_0402_cap | C8 |
| 1 | 120n | ZF_SMD_NonPol_0402_cap | C9 |
| 3 | R | ZF_SMD_NonPol_0402 | R1, R2, R3 |
| 1 | JMP | ZF_SMD_NonPol_0402 | R4 |
| 4 | 10k | ZF_SMD_NonPol_0402 | R5, R6, R7, R8 |
| 2 | 100 x4 | ZF_RN_4iso_CTS-0804 | RN1, RN3 |
| 1 | 150 x4 | ZF_RN_4iso_CTS-0804 | RN4 |
NeuroBytes Vestibular System design files
The KiCad project lives in the NeuroTinker/NeuroBytes_Vestibular_System repository on GitHub; these links point at the commit this page was built from.
NeuroBytes Vestibular System: common questions
What microcontroller does the NeuroBytes Vestibular System use?
The NeuroBytes Vestibular System is built around the STM32L011Gx, from the STM32 family.
How big is the NeuroBytes Vestibular System PCB?
The NeuroBytes Vestibular System measures 52.3 × 46.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NeuroBytes Vestibular System?
44 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the NeuroBytes Vestibular System design files?
From the NeuroTinker/NeuroBytes_Vestibular_System repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the NeuroBytes Vestibular System design in my own project?
Yes, under the terms of its GPL-3.0 license, which NeuroTinker chose for the repository.
Can I test firmware for the NeuroBytes Vestibular System without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k