ReRAM-SMU-V1
Ngethemba·ReRAM-SMU-V1·tools/setup/smoke-tests/kicad-test/smoke.kicad_pcb
About the ReRAM-SMU-V1 PCB
ReRAM-SMU-V1 is an open source PCB design by Ngethemba, published on GitHub. It is a 2-layer board measuring 52.1 × 46.4 mm, with 11 components from 10 distinct parts.
Other key parts include the ECC83. By type, the board carries 4 connectors, 4 resistors, 2 capacitors and 1 IC.
From the project
- scripts/ — project scripts (keep reproducible; record versions) - setup/ — tool/skill/MCP installation records (what, why, version)
- scripts/ — project scripts (keep reproducible; record versions) - setup/ — tool/skill/MCP installation records (what, why, version)
Do not install tools without documenting them.
Main components on the ReRAM-SMU-V1
ReRAM-SMU-V1 bill of materials (BOM)
11 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ECC83 | Valve_ECC-83-1 | U1 |
| 1 | IN | Altech_AK300_1x02_P5.00mm_45-Degree | P1 |
| 1 | OUT | Altech_AK300_1x02_P5.00mm_45-Degree | P2 |
| 1 | POWER | Altech_AK300_1x02_P5.00mm_45-Degree | P3 |
| 1 | CONN_2 | Altech_AK300_1x02_P5.00mm_45-Degree | P4 |
| 1 | 10uF | CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 680nF | C_Disc_D4.7mm_W2.5mm_P5.00mm | C2 |
| 2 | 1.5K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 100K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 47K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
ReRAM-SMU-V1 design files
The KiCad project lives in the Ngethemba/ReRAM-SMU-V1 repository on GitHub; these links point at the commit this page was built from.
ReRAM-SMU-V1: common questions
How big is the ReRAM-SMU-V1 PCB?
The ReRAM-SMU-V1 measures 52.1 × 46.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ReRAM-SMU-V1?
11 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ReRAM-SMU-V1 design files?
From the Ngethemba/ReRAM-SMU-V1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ReRAM-SMU-V1 design in my own project?
The repository has no license, so all rights stay with Ngethemba. Use it as a reference, and ask the author before reusing the design.