GLaDOS-Cam
nguyenmanhthao996tn·GLaDOS-Cam·pcb/GLaDOS-Cam/GLaDOS-Cam.kicad_pcb
About the GLaDOS-Cam PCB
GLaDOS-Cam is an open source STM32 PCB design by nguyenmanhthao996tn, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 38 components from 16 distinct parts.
Its main chip is the STM32U575VIT6, from the STM32 family. Other key parts include the IS66WVH8M8BLL-100B1LI, STLQ020C33R, XC6206-2_8V, XC6206-1_2V_C49446790 and FH12-24S-0_5SH(55). By type, the board carries 23 capacitors, 10 ICs, 2 connectors, 1 crystal and 1 resistor.
It belongs with the iot & wireless designs in this gallery.
From the project
Edge AI IoT board for vision-based applications
GLaDOS-Cam is a custom PCB built around the STM32U575VIT6 (Cortex-M33, 160 MHz) targeting battery-powered, field-deployed TinyML inference. No NPU. No cloud. Runs INT8 inference locally at 1–2 fps which is all that's needed.
Main components on the GLaDOS-Cam
GLaDOS-Cam bill of materials (BOM)
38 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32U575VIT6 | LQFP-100_L14.0-W14.0-P0.50-LS16.0-BL | U1 |
| 1 | IS66WVH8M8BLL-100B1LI | TFBGA-24_L8.0-W6.0-P1.00-TL_ISSI_ISS66WVH16M8 | U2 |
| 2 | STLQ020C33R | TSSOP-5_L2.0-W1.3-P0.65-LS2.1-BL | U3, U4 |
| 1 | XC6206-2_8V | SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | U5 |
| 1 | XC6206-1_2V_C49446790 | SOT-23-3_L3.0-W1.6-P1.90-LS2.8-BR | U6 |
| 1 | FH12-24S-0_5SH(55) | FPC-SMD_FH12-24S-0.5SH-55 | U7 |
| 1 | TF-CARD_H1_8 | TF-SMD_TF-CARD-H1.8 | U8 |
| 2 | TS-1187A-B-A-B | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | U9, U10 |
| 1 | X322516MLB4SI | CRYSTAL-SMD_4P-L3.2-W2.5-BL | X1 |
| 2 | Conn_01x03_Socket | PinSocket_1x03_P2.54mm_Vertical | J1, J2 |
| 1 | Q13FC1350000400 | FC-135R_L3.2-W1.5 | TXAL1 |
| 4 | 9pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4 |
| 10 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C7, C9, C11, C13, C15, C17, C20 +2 |
| 8 | 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C8, C10, C12, C14, C16, C18, C21 |
| 1 | 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19 |
| 1 | R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
GLaDOS-Cam design files
The KiCad project lives in the nguyenmanhthao996tn/GLaDOS-Cam repository on GitHub; these links point at the commit this page was built from.
GLaDOS-Cam: common questions
What microcontroller does the GLaDOS-Cam use?
The GLaDOS-Cam is built around the STM32U575VIT6, from the STM32 family.
How big is the GLaDOS-Cam PCB?
The GLaDOS-Cam measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GLaDOS-Cam?
38 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GLaDOS-Cam design files?
From the nguyenmanhthao996tn/GLaDOS-Cam repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GLaDOS-Cam design in my own project?
The repository has no license, so all rights stay with nguyenmanhthao996tn. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the GLaDOS-Cam without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k