HardLabs

DigiTOS-COMOD-SinBoard routed-2

NickNifontov·digiTOS-COMOD-SinBoard·digiTOS-COMOD-SinBoard-CODE/F030K6/PCB/Source-RevB/digiTOS-COMOD-SinBoard-routed-2.kicad_pcb

DigiTOS-COMOD-SinBoard routed-2 PCB layout, top view — open source STM32 board by NickNifontov

About the DigiTOS-COMOD-SinBoard routed-2 PCB

DigiTOS-COMOD-SinBoard routed-2 is an open source STM32 PCB design by NickNifontov, published on GitHub. It is a 2-layer board measuring 142.3 × 89.1 mm, with 61 components from 28 distinct parts.

Its main chip is the STM32F030K6T6_BoardA, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 19 resistors, 16 diodes, 7 connectors, 6 capacitors, 3 transformers and 1 IC.

It belongs with the power & battery designs in this gallery.

From the project

firmware for UPS Txx , TrueStudio project

Main components on the DigiTOS-COMOD-SinBoard routed-2

AMS1117-3.3

DigiTOS-COMOD-SinBoard routed-2 bill of materials (BOM)

61 components, 28 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
Conn_01x10_Female
J1
6
Conn_01x02_Female
J2, J5, J6, J7, J8, J9
3
Conn_01x02_Male
DEV1, DEV2, RAW-GND1
1
Fuse
F1
2
Screw_Terminal_01x02
NEUT-LINE_IN1, NEUT-LINE_OUT1
1
47 kOhm
RV1
1
Conn_01x03_Male
RX-TX-GND1
1
STM32F030K6T6_BoardA
STM321
1
BV202S09006
T1
1
BV302S18020
T2
1
ZMCT116A
T3
4
LED
D1, D2, D3, D4
11
Zener
D5, D6, D7, D8, D9, D10, D11, D12 +3
1
Schottky
D16
2
22uf
C1, C4
2
0,1uf
C2, C3
1
10uf
C5
1
1uf
C6
4
330 Ohm
R1, R2, R3, R4
Show 8 more
QtyPartRefs
2
100 Ohm
R5, R6
2
10kOhm
R7, R8
1
18 Ohm
R9
3
10 kOhm
R10, R11, R14
1
2 kOhm
R12
1
100 kOhm
R13
2
470 kOhm
R15, R16
3
R0
R17, R18, R19

DigiTOS-COMOD-SinBoard routed-2 design files

The KiCad project lives in the NickNifontov/digiTOS-COMOD-SinBoard repository on GitHub; these links point at the commit this page was built from.

DigiTOS-COMOD-SinBoard routed-2: common questions

What microcontroller does the DigiTOS-COMOD-SinBoard routed-2 use?

The DigiTOS-COMOD-SinBoard routed-2 is built around the STM32F030K6T6_BoardA, from the STM32 family.

How big is the DigiTOS-COMOD-SinBoard routed-2 PCB?

The DigiTOS-COMOD-SinBoard routed-2 measures 142.3 × 89.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DigiTOS-COMOD-SinBoard routed-2?

61 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the DigiTOS-COMOD-SinBoard routed-2 design files?

From the NickNifontov/digiTOS-COMOD-SinBoard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the DigiTOS-COMOD-SinBoard routed-2 design in my own project?

The repository has no license, so all rights stay with NickNifontov. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the DigiTOS-COMOD-SinBoard routed-2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in digiTOS-COMOD-SinBoard

Similar boards