8-Channel-Relay-Card-Module-Using-ULN2803-Driver-IC-
Nikhil-Misal-24·8-Channel-Relay-Card-Module-Using-ULN2803-Driver-IC-
About the 8-Channel-Relay-Card-Module-Using-ULN2803-Driver-IC-
8-Channel-Relay-Card-Module-Using-ULN2803-Driver-IC- is an open source PCB design by Nikhil-Misal-24, published on GitHub. It is a 2-layer board measuring 111.8 × 86.4 mm, with 64 components from 13 distinct parts.
Other key parts include the ULN2803A. By type, the board carries 25 resistors, 17 diodes, 10 connectors, 8 relays, 2 capacitors and 1 IC.
From the project
ULN2803 8-Channel Relay Driver Module is a PCB-based relay control board designed to interface microcontrollers such as Arduino, ESP32, Raspberry Pi, and other embedded systems with high-voltage or high-current loads.
ULN2803 Based 8-Channel Relay Driver Module 8-Channel Relay Card Using ULN2803 Darlington Driver
This project presents the design and implementation of an 8-Channel Relay Driver Module using the ULN2803 Darlington Transistor Array. The module is designed to allow low-power microcontroller signals to safely control high-voltage or high-current loads such as lamps, motors, fans, and other electrical devices. The ULN2803 IC acts as a relay driver, enabling reliable switching by amplifying the current from digital control signals. This design simplifies interfacing with microcontrollers like…
Main components on the 8-Channel-Relay-Card-Module-Using-ULN2803-Driver-IC-
8-Channel-Relay-Card-Module-Using-ULN2803-Driver-IC- bill of materials (BOM)
64 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ULN2803A | DIP-18_W7.62mm_LongPads | U1 |
| 1 | POWER | JST_NV_B02P-NV_1x02_P5.00mm_Vertical | J1 |
| 1 | INPUTS | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 4 | NC CO NO | JST_NV_B03P-NV_1x03_P5.00mm_Vertical | J3, J5, J9, J10 |
| 4 | NO CO NC | JST_NV_B03P-NV_1x03_P5.00mm_Vertical | J4, J6, J7, J8 |
| 8 | G5LE-1 | Relay_SPDT_Omron-G5LE-1 | K1, K2, K3, K4, K5, K6, K7, K8 |
| 1 | SW_SPST | SW_DIP_SPSTx01_Slide_6.7x4.1mm_W6.73mm_P2.54mm_LowProfile_JPin | SW1 |
| 9 | LED | LED_1206_3216Metric | D1, D3, D4, D6, D8, D10, D12, D14 +1 |
| 8 | D_Small | D_1206_3216Metric | D2, D5, D7, D9, D11, D13, D15, D17 |
| 1 | 100nF | C_0805_2012Metric | C1 |
| 1 | 100uF | C_0805_2012Metric | C2 |
| 9 | 680E | R_0805_2012Metric | R1, R18, R19, R20, R21, R22, R23, R24 +1 |
| 16 | 10K | R_0805_2012Metric | R2, R3, R4, R5, R6, R7, R8, R9 +8 |
8-Channel-Relay-Card-Module-Using-ULN2803-Driver-IC- design files
The KiCad project lives in the Nikhil-Misal-24/8-Channel-Relay-Card-Module-Using-ULN2803-Driver-IC- repository on GitHub; these links point at the commit this page was built from.
8-Channel-Relay-Card-Module-Using-ULN2803-Driver-IC-: common questions
How big is the 8-Channel-Relay-Card-Module-Using-ULN2803-Driver-IC-?
The 8-Channel-Relay-Card-Module-Using-ULN2803-Driver-IC- measures 111.8 × 86.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 8-Channel-Relay-Card-Module-Using-ULN2803-Driver-IC-?
64 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the 8-Channel-Relay-Card-Module-Using-ULN2803-Driver-IC- design files?
From the Nikhil-Misal-24/8-Channel-Relay-Card-Module-Using-ULN2803-Driver-IC- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 8-Channel-Relay-Card-Module-Using-ULN2803-Driver-IC- design in my own project?
The repository has no license, so all rights stay with Nikhil-Misal-24. Use it as a reference, and ask the author before reusing the design.