Through Hole Single
About the Through Hole Single PCB
Through Hole Single is an open source PCB design by nmikstas, published on GitHub. It is a 2-layer board measuring 127.5 × 105.4 mm, with 33 components from 13 distinct parts.
Other key parts include the L78L05_TO92. By type, the board carries 10 transistors, 9 capacitors, 6 ICs, 6 resistors and 2 connectors.
From the project
Recreation of the Atari POKEY chip (work in progress)
Main components on the Through Hole Single
Through Hole Single bill of materials (BOM)
33 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L78L05_TO92 | TO-92_Inline | U1 |
| 5 | ~ | DIP_20 | U2, U3, U4, U5, U6 |
| 10 | TN2106 | TO-92_Inline | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +2 |
| 1 | 2x20_Conn | Con_2X20 | J1 |
| 1 | ~ | Proto-72Pin | J2 |
| 8 | .1uf | C_Axial_L3.8mm_D2.6mm_P10.00mm_Horizontal | C1, C3, C4, C5, C6, C7, C8, C9 |
| 1 | 10uf | CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 825 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 1.65K 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 3.3K 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 7.68K 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 24K 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 75K 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
Through Hole Single design files
The KiCad project lives in the nmikstas/atari_pokey repository on GitHub; these links point at the commit this page was built from.
Through Hole Single: common questions
How big is the Through Hole Single PCB?
The Through Hole Single measures 127.5 × 105.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Through Hole Single?
33 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Through Hole Single design files?
From the nmikstas/atari_pokey repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Through Hole Single design in my own project?
The repository has no license, so all rights stay with nmikstas. Use it as a reference, and ask the author before reusing the design.
More boards in atari_pokey
Prototype1
111.8 × 80.8 mm164 parts4LNo license20
Quad Prototype
50.3 × 63.5 mm113 parts4LNo license20
Prototype2
50.3 × 63.5 mm93 parts4LNo license20
Through Hole Quad Xilinx
118 × 88.9 mm64 parts2LNo license20
Though Hole Single Xilinx
127.5 × 105.4 mm34 parts2LNo license20