GESC
About the GESC PCB
GESC is an open source PCB design by NormalHuman-Anything, published on GitHub under the CERN-OHL-W-2.0 license. It is a 4-layer board measuring 140.5 × 80 mm, with 72 components from 13 distinct parts.
By type, the board carries 33 resistors, 18 transistors, 14 capacitors and 6 connectors.
From the project
g30 vesc
GESC bill of materials (BOM)
72 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 18 | TOLL | TOLL-8_L10.4-W9.9-P1.20-LS11.7-BL | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +10 |
| 1 | gates_A | PinHeader_2x02_P2.00mm_Vertical_SMD | J1 |
| 1 | gates_B | PinHeader_2x03_P2.00mm_Vertical_SMD | J2 |
| 1 | SH2 | PinHeader_1x02_P2.00mm_Vertical_SMD_Pin1Right | J3 |
| 1 | SH1 | PinHeader_1x02_P2.00mm_Vertical_SMD_Pin1Right | J4 |
| 1 | gates_C | PinHeader_2x03_P2.00mm_Vertical_SMD | J5 |
| 1 | SH3 | PinHeader_1x02_P2.00mm_Vertical_SMD_Pin1Right | J6 |
| 1 | 10k NTC | R_0402_1005Metric | TH1 |
| 10 | 470NF 470nF | C_1210_3225Metric | C15, C16, C17, C18, C19, C20, C21, C22 +2 |
| 4 | 330UF 330uF | CAP-SMD_BD12.5-L13.5-W13.5-FD-1 | C25, C26, C27, C28 |
| 18 | 4R7 | R_0603_1608Metric | R1, R2, R7, R8, R10, R11, R14, R15 +10 |
| 6 | 10K 10k | R_0603_1608Metric | R3, R4, R5, R6, R18, R47 |
| 9 | 0.5MR 0.5mR | R3920 | R9, R12, R13, R16, R17, R52, R55, R58 +1 |
GESC design files
The KiCad project lives in the NormalHuman-Anything/GESC repository on GitHub; these links point at the commit this page was built from.
- LayoutGESC/GESC.kicad_pcb
- SchematicGESC/GESC.kicad_sch
- BOMbom.csv
GESC: common questions
How big is the GESC PCB?
The GESC measures 140.5 × 80 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the GESC?
72 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GESC design files?
From the NormalHuman-Anything/GESC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GESC design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which NormalHuman-Anything chose for the repository.