Drawbridge featherwing

nstielau·gate_controller·hardware/featherwing/drawbridge-featherwing.kicad_pcb

Drawbridge featherwing PCB layout, top view — open source board by nstielau

About the Drawbridge featherwing PCB

Drawbridge featherwing is an open source PCB design by nstielau, published on GitHub. It is a 2-layer board measuring 50.8 × 22.9 mm, with 12 components from 9 distinct parts.

By type, the board carries 5 resistors, 3 connectors, 3 diodes and 1 transistor.

From the project

This is a revision-stamped prototype board for a Feather-compatible host, including the Unexpected Maker FeatherS3[D] and Adafruit ESP32-S3 Reverse TFT Feather. It provides the existing, proven 2N3904 transistor output unchanged: J3 pin 1 is the switched output and J3 pin 2 is th

This is a revision-stamped prototype board for a Feather-compatible host, including the Unexpected Maker FeatherS3[D] and Adafruit ESP32-S3 Reverse TFT Feather. It provides the existing, proven 2N3904 transistor output unchanged: J3 pin 1 is the switched output and J3 pin 2 is the shared ground. The Feather module is not part of the assembly BOM.

Schematic and PCB signal names use portable Feather header labels: WIFID5, MQTTD6, HOLDD9, and CTRLD11. GPIO numbers differ between Feather models and therefore are not part of these net names.

Drawbridge featherwing bill of materials (BOM)

12 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
2N3904BU
2N3904
onsemi
Q1
1
X6511WV-16H-C30D60
Feather 16
XKB
J1
1
X6511WV-12H-C30D60
Feather 12
XKB
J2
1
1725656
OUT / GND
Phoenix Contact
J3
1
204-15UTC/S400-X9
WIFI
Everlight
D1
1
204-10SUBC/S400-A4
MQTT
Everlight
D2
1
204-10SUGD/S400-A5
HOLD
Everlight
D3
4
CFR-25JB-52-1K
1k
Yageo
R1, R3, R4, R5
1
MFR50SJT-52-100K
100k
Yageo
R2

Drawbridge featherwing design files

The KiCad project lives in the nstielau/gate_controller repository on GitHub; these links point at the commit this page was built from.

Drawbridge featherwing: common questions

How big is the Drawbridge featherwing PCB?

The Drawbridge featherwing measures 50.8 × 22.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Drawbridge featherwing?

12 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Drawbridge featherwing design files?

From the nstielau/gate_controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Drawbridge featherwing design in my own project?

The repository has no license, so all rights stay with nstielau. Use it as a reference, and ask the author before reusing the design.

More boards in gate_controller