RFID BOARD EM4095

Octanis3·Octanis3-Electronics·RFID_BOARD_V2_EM4095/RFID_BOARD_EM4095.kicad_pcb

RFID BOARD EM4095 layout, top view — open source board by Octanis3

About the RFID BOARD EM4095

RFID BOARD EM4095 is an open source PCB design by Octanis3, published on GitHub under the MIT license. It is a 2-layer board measuring 24 × 42 mm, with 23 components from 18 distinct parts.

Other key parts include the EM4095. By type, the board carries 12 capacitors, 3 resistors, 1 IC, 1 connector and 1 diode.

From the project

Contains PCB files of the Owl Monitoring Device

Contains PCB files of the Owl Monitoring Device. More information on http://nestbox.octanis.org/

Main components on the RFID BOARD EM4095

RFID BOARD EM4095 bill of materials (BOM)

23 components, 18 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	EM4095	SOIC-16_3.9x9.9mm_Pitch1.27mm	U1
1	CONN_01X05	Pin_Header_Straight_1x05_Pitch2.54mm	J1
1	C_fine_tuning (10nF, 50V)	C_0603	CRES1
1	1.8n 250V	C_0805	CRES2
1	1n 450V	C_0805	CRES3
1	10p 500V	C_0805	Cdiv1
1	1.5n	C_0603	Cdiv2
1	STTH1R06	SMB_Standard	D1
2	10u	C_0805	C1, C12
3	100n	C_0603	C2, C7, C11
2	1.8n 250V	C_0805	C3, C4
1	10n (22n max)	C_0603	C5
1	10n	C_0603	C6
1	DNP or 100n	C_0603	C8
2	100n 250V	C_0603	C9, C10
1	100R	R_0603	R1
1	100k	R_0603	R2
1	0R	R_0603	R3

RFID BOARD EM4095 design files

The KiCad project lives in the Octanis3/Octanis3-Electronics repository on GitHub; these links point at the commit this page was built from.

RFID BOARD EM4095: common questions

How big is the RFID BOARD EM4095?

The RFID BOARD EM4095 measures 24 × 42 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RFID BOARD EM4095?

23 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RFID BOARD EM4095 design files?

From the Octanis3/Octanis3-Electronics repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the RFID BOARD EM4095 design in my own project?

Yes, under the terms of its MIT license, which Octanis3 chose for the repository.

More boards in Octanis3-Electronics