FGControl
About the FGControl PCB
FGControl is an open source PCB design by odegroote, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 71 mm, with 49 components from 23 distinct parts.
Other key parts include the LM6172. By type, the board carries 17 capacitors, 15 resistors, 5 connectors, 2 ICs, 2 crystals and 1 diode.
From the project
KiCAD 9.0 project for a 2 layer PCB design of a 2 channel functiongenerator
A PCB for a two channel functiongenerator based on the AD9833 with adjustable peak voltage to a maximum of 10 Volts and adjustable offset. It was designed using KiCAD v9.0.
Main components on the FGControl
FGControl bill of materials (BOM)
49 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LM6172 | DIP-8_W7.62mm | U1, U2 |
| 1 | CON1 | LINX_CONBNC002 | X1 |
| 1 | CON2 | LINX_CONBNC002 | X2 |
| 1 | Conn_01x02_Socket | PinSocket_1x02_P2.54mm_Vertical | J1 |
| 2 | Amplitude | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2, J3 |
| 2 | offset | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4, J5 |
| 1 | ~ | Converter_DCDC_TRACO_TSR-1_THT | DC1 |
| 2 | 500 | Potentiometer_Bourns_3296W_Vertical | RV1, RV2 |
| 1 | TERM-3 | TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal | SV1 |
| 1 | Conn_01x05_Socket | PinSocket_1x05_P2.54mm_Vertical | SV2 |
| 2 | Conn_01x07_Socket | PinSocket_1x07_P2.54mm_Vertical | SV3, SV4 |
| 1 | LED | LED_D3.0mm | D1 |
| 2 | 470uF | CP_Radial_D12.5mm_P5.00mm | C1, C2 |
| 4 | 10uF | CP_Radial_Tantal_D4.5mm_P2.50mm | C3, C6, C7, C8 |
| 2 | 100nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C4, C5 |
| 4 | 0.01uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C9, C10, C13, C14 |
| 4 | 2.2uF | CP_Radial_Tantal_D4.5mm_P2.50mm | C11, C12, C15, C16 |
| 1 | 10uF | CP_Radial_D12.5mm_P5.00mm | C17 |
| 3 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R15 |
| 2 | 680 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R7 |
| 6 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R8, R9, R10, R12, R14 |
| 2 | 520 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11, R13 |
FGControl design files
The KiCad project lives in the odegroote/FGControlPCB repository on GitHub; these links point at the commit this page was built from.
- Layoutfunctiongenerator.kicad_pcb
- Schematicfunctiongenerator.kicad_sch
FGControl: common questions
How big is the FGControl PCB?
The FGControl measures 100 × 71 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FGControl?
49 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the FGControl design files?
From the odegroote/FGControlPCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the FGControl design in my own project?
Yes, under the terms of its GPL-3.0 license, which odegroote chose for the repository.