AgonLight2-Proto
About the AgonLight2-Proto PCB
AgonLight2-Proto is an open source PCB design by OLIMEX, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 60 mm, with 55 components from 9 distinct parts.
By type, the board carries 5 test points, 2 LEDs and 2 resistors.
From the project
AgonLight2-Proto is small board with dimensions 100x80mm. It allows you to fast prototype concept and ideas for AgonLight2 computer.
AgonLight2-Proto is small board with dimensions 100x80mm. It allows you to fast prototype concept and ideas for AgonLight2 computer.
IDC connector 34 pin for connection on AgonLight2 GPIO 3mm RED LED for 5V power indication 3mm GREEN LED for 3.3V power indication Sea-of-Pads GND and 3.3V bus connecting vertically all pads on the left edge GND and 5V bus connecting vertically all pads on the right edge Dimensions 100x80mm 3 hex distance spacers for keeping board horizontally when ICD connector is plug to AgonLight2 GPIO
AgonLight2-Proto bill of materials (BOM)
55 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 39 | TESTPAD | TEST_PAD40x70_SQUARE | 3.3V1, 3.3V2, +5V0, GND1, GND2, GND3, GND4, GND5 +31 |
| 1 | FK-DK-2X17-LF(IDC-34S/PCB) | FK-DK-2X17-LF(IDC-34S_PCB)-SMD | GPIO1-1 |
| 1 | NA(FK-DK-2X17-LF(IDC-34S/PCB)) | FK-DK-2X17-LF(IDC-34S_PCB) | GPIO1-2 |
| 4 | Mounting_Hole_NPTH | Mounting_Hole_Drill-3.3mm_Clerance-7mm | MH1, MH2, MH3, MH4 |
| 1 | Sign_RecycleBin_1 | Sign_RecycleBin_1 | Sign_RecycleBin_1 |
| 5 | Val** | TEST_PAD40x70_SQUARE | TP1, TP2, TP3, TP4, TP5 |
| 1 | LED/Green/3mm/PTH | LED-3mm-PTH-KA | LED_3V3 |
| 1 | LED/Red/3mm/PTH | LED-3mm-PTH-KA | LED_5V0 |
| 2 | 2k/0.125W | R_0.125W_PTH | R1, R2 |
AgonLight2-Proto design files
The KiCad project lives in the OLIMEX/AgonLight2-Proto repository on GitHub; these links point at the commit this page was built from.
AgonLight2-Proto: common questions
How big is the AgonLight2-Proto PCB?
The AgonLight2-Proto measures 100 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AgonLight2-Proto?
55 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the AgonLight2-Proto design files?
From the OLIMEX/AgonLight2-Proto repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the AgonLight2-Proto design in my own project?
Yes, under the terms of its GPL-3.0 license, which OLIMEX chose for the repository.