Rotary Encoder Board
Open-2-Photon-Microscope·3-axis-controller·electronics/rotary_encoder_board/board2.kicad_pcb
About the Rotary Encoder Board
Rotary Encoder Board is an open source PCB design by Open-2-Photon-Microscope, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 39 × 52 mm, with 10 components from 6 distinct parts.
By type, the board carries 6 resistors, 2 connectors and 2 capacitors.
From the project
a controller system to operate motors and microscope XYZ stage
A manipulator device to operate microscope stage XYZ translations. This project was specifically designed for the OpenFlexure Delta Stage.
Rotary Encoder Board bill of materials (BOM)
10 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | A B VCC GND | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | GND VCC B A | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 2 | 22NF 22nF | CP_Radial_D4.0mm_P2.00mm | C1, C2 |
| 2 | 1kΩ | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R5 |
| 2 | 1k8Ω | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2, R4 |
| 2 | 1.8K 1kΩ | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R3, R6 |
Rotary Encoder Board design files
The KiCad project lives in the Open-2-Photon-Microscope/3-axis-controller repository on GitHub; these links point at the commit this page was built from.
Rotary Encoder Board: common questions
How big is the Rotary Encoder Board?
The Rotary Encoder Board measures 39 × 52 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rotary Encoder Board?
10 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rotary Encoder Board design files?
From the Open-2-Photon-Microscope/3-axis-controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rotary Encoder Board design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which Open-2-Photon-Microscope chose for the repository.