Pockel cell controller

Open-2-Photon-Microscope·pockel-cell-controller·electronics/PC_driver/PC_driver.kicad_pcb

Pockel cell controller PCB layout, top view — open source board by Open-2-Photon-Microscope

About the Pockel cell controller PCB

Pockel cell controller is an open source PCB design by Open-2-Photon-Microscope, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 98 × 57 mm, with 22 components from 19 distinct parts.

Other key parts include the LM10CLN, CA3240AE and ADG419BN. By type, the board carries 7 resistors, 5 connectors, 3 ICs, 3 capacitors, 2 diodes and 1 switch.

From the project

An open source electronic circuit to drive pockel cells.

An open source circuit to modulate laser intensity in a 2 Photon microscope. This modulation is necessary when visual stimulation is used to elicit responses from biological tissue (photoreceptors). The laser power is tunned high and low periodically (in our systems at 500Hz using a square wavefom at 80% duty cycle). When laser power is low, visual stimulation is on, when laser power is high, visual stimulation is off.

Pockel cell controller, from the project README
From the project README

Main components on the Pockel cell controller

LM10CLNCA3240AEADG419BN

Pockel cell controller bill of materials (BOM)

22 components, 19 distinct parts.

QtyPartRefs
1
LM10CLN
U1
1
CA3240AE
U2
1
ADG419BN
U3
1
Analog_Input (0-5V)
J1
1
add_resist_jumper
J2
1
Analog_out (0to5V)
J3
1
TTL_input (blanking)
J4
1
USB_C_Plug_USB2.0
P1
1
laser_int 5k
RV1
1
SW_SPDT
SW1
1
potent_led
D1
1
switch_led
D2
2
100nF
C1, C3
1
10nF
C2
2
100k
R1, R6
1
10k
R2
2
3k6
R3, R7
1
60
R4
1
90k
R5

Pockel cell controller design files

The KiCad project lives in the Open-2-Photon-Microscope/pockel-cell-controller repository on GitHub; these links point at the commit this page was built from.

Pockel cell controller: common questions

How big is the Pockel cell controller PCB?

The Pockel cell controller measures 98 × 57 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pockel cell controller?

22 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pockel cell controller design files?

From the Open-2-Photon-Microscope/pockel-cell-controller repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Pockel cell controller design in my own project?

Yes, under the terms of its GPL-3.0 license, which Open-2-Photon-Microscope chose for the repository.