OpenRigDVStick

openRigProject·openRigDVStick·kicad/openRigDVStick.kicad_sch

This repository ships a schematic but no board layout.

About the OpenRigDVStick PCB

OpenRigDVStick is an open source PCB design by openRigProject, published on GitHub. It is a board, with 1 components from 1 distinct parts.

Other key parts include the AMBE-3000R.

From the project

openRig — Open source USB DVSI AMBE-3000R codec dongle

Open source USB dongle providing a licensed DVSI AMBE-3000R hardware codec for DMR and YSF voice encode/decode. A fully open alternative to the ThumbDV / DVStick30.

Plug into any USB port — the host sees a standard CDC serial device. Compatible with openRigOS, openRigConsole, and any software that speaks the DVSI serial packet protocol.

- AMBE-3000R — licensed DVSI hardware codec; supports AMBE+2, AMBE+2 Pro, and IMBE; covers both DMR and YSF (D-Star, P25 Phase 1 via IMBE) - USB-C connector — bus-powered from USB 5 V; no external supply needed - CP2102N USB bridge — presents as /dev/ttyUSBx…

Main components on the OpenRigDVStick

OpenRigDVStick bill of materials (BOM)

1 components, 1 distinct parts.

QtyPartRefs
1
AMBE-3000R
U1

OpenRigDVStick design files

The KiCad project lives in the openRigProject/openRigDVStick repository on GitHub; these links point at the commit this page was built from.

OpenRigDVStick: common questions

How many components are on the OpenRigDVStick?

1 components, from 1 distinct parts. The full bill of materials is listed on this page.

Where can I download the OpenRigDVStick design files?

From the openRigProject/openRigDVStick repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the OpenRigDVStick design in my own project?

The repository has no license, so all rights stay with openRigProject. Use it as a reference, and ask the author before reusing the design.