Pgbnoroute
ovgu-FINken·DE-HW-Hardware·PCBs/pgbnoroute.kicad_pcb
About the Pgbnoroute PCB
Pgbnoroute is an open source PCB design by ovgu-FINken, published on GitHub. It is a 2-layer board measuring 30.7 × 49.8 mm, with 13 components from 4 distinct parts.
From the project
Hardware for the DE-Project Hardware Intergration
Pgbnoroute bill of materials (BOM)
13 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BATT | Socket_Strip_Angled_1x02_Pitch2.54mm | P1 |
| 6 | CONN_01X04 | Socket_Strip_Angled_1x04_Pitch2.54mm | P2, P3, P4, P5, P6, P7 |
| 4 | GND | Pin_Header_Straight_1x01_Pitch2.54mm | P8, P9, P10, P11 |
| 2 | 5V.R | 5V_VOLTAGE_REGULATOR | J_REG_3.3V_1, J_REG_5V/1A_1 |
Pgbnoroute design files
The KiCad project lives in the ovgu-FINken/DE-HW-Hardware repository on GitHub; these links point at the commit this page was built from.
Pgbnoroute: common questions
How big is the Pgbnoroute PCB?
The Pgbnoroute measures 30.7 × 49.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pgbnoroute?
13 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pgbnoroute design files?
From the ovgu-FINken/DE-HW-Hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Pgbnoroute design in my own project?
The repository has no license, so all rights stay with ovgu-FINken. Use it as a reference, and ask the author before reusing the design.