Ozseccon dev badge
ozseccon·ozseccon-dev-badge·InitialDesign/InitialDesign.kicad_pcb
About the Ozseccon dev badge PCB
Ozseccon dev badge is an open source STM32 PCB design by ozseccon, published on GitHub. It is a 2-layer board measuring 3.5 × 3.5 mm, with 45 components from 27 distinct parts.
Its main chip is the STM32F042C6T6, from the STM32 family. Other key parts include the TPS61222DCKR and M24SR02-YMN6T. By type, the board carries 12 capacitors, 11 resistors, 9 connectors, 7 diodes, 3 ICs and 1 antenna.
It belongs with the wearables designs in this gallery.
From the project
OzSecCon Badge Dev environment
Main components on the Ozseccon dev badge
Ozseccon dev badge bill of materials (BOM)
45 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS61222DCKR | SC-70-6 | U1 |
| 1 | STM32F042C6T6 | LQFP-48_7x7mm_Pitch0.5mm | U2 |
| 1 | M24SR02-YMN6T | SO-8_5.3x6.2mm_Pitch1.27mm | U3 |
| 1 | Conn_01x07_Female | Socket_Strip_Straight_1x07_Pitch2.54mm | J1 |
| 2 | Conn_01x04 | Pin_Header_Straight_1x04_Pitch2.54mm | J2, J3 |
| 1 | USB_OTG | USB_Micro-B | J4 |
| 2 | Conn_01x02 | Pin_Header_Straight_1x02_Pitch2.54mm | J5, J6 |
| 1 | Conn_02x03_Odd_Even | Pin_Header_Straight_2x03_Pitch2.54mm | J7 |
| 1 | Conn_02x02_Odd_Even | Pin_Header_Straight_2x02_Pitch2.54mm | J8 |
| 1 | Conn_02x08_Odd_Even | Pin_Header_Straight_2x08_Pitch2.54mm | J9 |
| 1 | Antenna_Loop | NFC_Antenna | AE1 |
| 1 | 1020_Keystone | Keystone_2466_1xAAA | BT1 |
| 2 | 5050_LED_RGB | LED_RGB_5050-6 | D1, D2 |
| 5 | LED | LED_1206 | D3, D4, D5, D6, D7 |
| 1 | 4.7uH | L_Taiyo-Yuden_NR-30xx | L1 |
| 2 | 10uF | CP_Elec_4x5.3 | C1, C2 |
| 2 | 10nF | C_0805 | C3, C11 |
| 3 | 100nF | C_0805 | C4, C5, C7 |
| 1 | 1uF | C_0805 | C6 |
| 2 | 4.7uF | C_0805 | C8, C9 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100pF | C_0805 | C10 |
| 1 | C | C_0805 | C12 |
| 2 | 22 | R_0805 | R1, R2 |
| 1 | 2.7M | R_0805 | R3 |
| 1 | 470k | R_0805 | R4 |
| 2 | 10k | R_0805 | R5, R6 |
| 5 | R | R_0805 | R7, R8, R9, R10, R11 |
Ozseccon dev badge design files
The KiCad project lives in the ozseccon/ozseccon-dev-badge repository on GitHub; these links point at the commit this page was built from.
Ozseccon dev badge: common questions
What microcontroller does the Ozseccon dev badge use?
The Ozseccon dev badge is built around the STM32F042C6T6, from the STM32 family.
How big is the Ozseccon dev badge PCB?
The Ozseccon dev badge measures 3.5 × 3.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ozseccon dev badge?
45 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ozseccon dev badge design files?
From the ozseccon/ozseccon-dev-badge repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Ozseccon dev badge design in my own project?
The repository has no license, so all rights stay with ozseccon. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ozseccon dev badge without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k