KlusterLab HMI r1.0
About the KlusterLab HMI r1.0 PCB
KlusterLab HMI r1.0 is an open source PCB design by PCB-Arts, published on GitHub. It is a 2-layer board measuring 70 × 15 mm, with 15 components from 6 distinct parts.
By type, the board carries 5 capacitors, 5 resistors, 2 modules, 2 connectors and 1 switch.
From the project
KlusterLab is an open FPGA development platform designed for experimenting with high-speed interfaces and formally verified IP cores.
The electronic design data from the KlusterLab 2.0 project is stored in this repo.
KlusterLab HMI r1.0 bill of materials (BOM)
15 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2007198-1 9774050360R TE Connectivity | 9774050360R | M1, M2 |
| 1 | 2-2013310-1 Pinheader, 10 Pin, THT, Straight TE Connectivity | 62701021621 | J1 |
| 1 | 74441-0010 WE / WR-PHD / 61300411121 / PinHeader / 1x4 Pin / RM2.54 / Top Entry / Male Molex | WE_61300411121 | J2 |
| 1 | LL3301BF065QJ AlpsAlpine SKRHACE010 E-Switch | AlpsAlpine_SKRHACE010 | S1 |
| 5 | 100nF 50V Wurth Elektronik | CAP_0402_L | C1, C2, C3, C4, C5 |
| 5 | 1k 1% Vishay / Dale | RES_0402_L | R1, R2, R3, R4, R5 |
KlusterLab HMI r1.0 design files
The KiCad project lives in the PCB-Arts/fast-open-switch-hardware repository on GitHub; these links point at the commit this page was built from.
- LayoutKlusterlab2.0/KlusterLab r2.0_KiCad Import/KlusterLab HMI r1.0/KlusterLab HMI r1.0/KlusterLab HMI r1.0.kicad_pcb
- SchematicKlusterlab2.0/KlusterLab r2.0_KiCad Import/KlusterLab HMI r1.0/KlusterLab HMI r1.0/KlusterLab HMI r1.0.kicad_sch
- BOMKlusterlab2.0/KlusterLab r2.0_Altium Source/KlusterLab r2.0/Outputs/PCBA/KlusterLab_PL_r2.0.xlsx
KlusterLab HMI r1.0: common questions
How big is the KlusterLab HMI r1.0 PCB?
The KlusterLab HMI r1.0 measures 70 × 15 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the KlusterLab HMI r1.0?
15 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the KlusterLab HMI r1.0 design files?
From the PCB-Arts/fast-open-switch-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the KlusterLab HMI r1.0 design in my own project?
The repository has no license, so all rights stay with PCB-Arts. Use it as a reference, and ask the author before reusing the design.
