Satnogs commsDUMMY

PeakSat·COMMSBoard_PCB·DummyBoard/satnogs-commsDUMMY.kicad_pcb

Satnogs commsDUMMY PCB layout, top view — open source board by PeakSat

About the Satnogs commsDUMMY PCB

Satnogs commsDUMMY is an open source PCB design by PeakSat, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 90.2 × 95.9 mm, with 6 components from 6 distinct parts.

Other key parts include the Alinx_ZYNQ-7000_SOM_XC7Z020. By type, the board carries 3 connectors, 2 antennas and 1 IC.

From the project

PeakSat's COMMS Board PCB files

A CubeSat format (LibreCube Board) COMMS board. It supports UHF and S-Band concurrent half duplex (in each band) communication. More details could be found here.

Requires lsf-kicad-lib to be installed. Set path LSFKICADLIB to point to lsf-kicad-lib folder for 3D models to appear correctly

One exception is Hierarchical sheets provided that:

A single person is working on a Hierarchical sheet Annotation is using sheet number Global nets are respected Changes in Hierarchical labels are coordinated

Main components on the Satnogs commsDUMMY

Alinx_ZYNQ-7000_SOM_XC7Z020

Satnogs commsDUMMY bill of materials (BOM)

6 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Alinx_ZYNQ-7000_SOM_XC7Z020
U301
1
df11-6dp-2ds
ANT_DEP
J101
1
ESQ-126-39-x-D
Η1
J102
1
ESQ-126-39-x-D
Η2
J103
1
RF 24
ANT-S901
1
RF 09
ANT-U1001

Satnogs commsDUMMY design files

The KiCad project lives in the PeakSat/COMMSBoard_PCB repository on GitHub; these links point at the commit this page was built from.

Satnogs commsDUMMY: common questions

How big is the Satnogs commsDUMMY PCB?

The Satnogs commsDUMMY measures 90.2 × 95.9 mm, has 2 copper layers and is 0.1989 mm thick.

How many components are on the Satnogs commsDUMMY?

6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Satnogs commsDUMMY design files?

From the PeakSat/COMMSBoard_PCB repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Satnogs commsDUMMY design in my own project?

Yes, under the terms of its CERN-OHL-1.2 license, which PeakSat chose for the repository.

More boards in COMMSBoard_PCB