Raspberry Pi SX1280 Adapter
About the Raspberry Pi SX1280 Adapter PCB
Raspberry Pi SX1280 Adapter is an open source PCB design by pete4radio, published on GitHub. It is a 4-layer board measuring 30 × 65 mm, with 11 components from 9 distinct parts.
Other key parts include the LoRa1280F27-TCXO. By type, the board carries 4 capacitors, 2 connectors, 2 resistors, 1 IC, 1 transistor and 1 diode.
From the project
SAMWISE boards existing or newly ordered March 2025
Main components on the Raspberry Pi SX1280 Adapter
Raspberry Pi SX1280 Adapter bill of materials (BOM)
11 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LoRa1280F27-TCXO | LORA128XF27 | U2 |
| 1 | MMBT2222AT IRLML2803 | SOT-23 | Q2 |
| 1 | PRT-21570 | PRT-21570 | J1 |
| 1 | 901-144 Amphenol_901-144 | SMA_Amphenol_901-144_horizontal | J4 |
| 1 | LTST-C191KGKT | LED_0603_1608Metric | D1 |
| 2 | 10uF | C_0603_1608Metric | C9, C12 |
| 2 | 0.1uF | C_0603_1608Metric | C10, C13 |
| 1 | 1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 330 | R_0603_1608Metric | R10 |
Raspberry Pi SX1280 Adapter design files
The KiCad project lives in the pete4radio/SAMWISE-1-2-HW-Training repository on GitHub; these links point at the commit this page was built from.
Raspberry Pi SX1280 Adapter: common questions
How big is the Raspberry Pi SX1280 Adapter PCB?
The Raspberry Pi SX1280 Adapter measures 30 × 65 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Raspberry Pi SX1280 Adapter?
11 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Raspberry Pi SX1280 Adapter design files?
From the pete4radio/SAMWISE-1-2-HW-Training repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Raspberry Pi SX1280 Adapter design in my own project?
The repository has no license, so all rights stay with pete4radio. Use it as a reference, and ask the author before reusing the design.
More boards in SAMWISE-1-2-HW-Training
RP2040/RP2350ADCS board
90.2 × 95.9 mm182 parts4LNo license0
RP2040/RP2350Mainboard
90.2 × 95.9 mm175 parts4LNo license0
RP2040/RP2350Motor Drivers
90.2 × 95.9 mm164 parts4LNo license0
LT8490 - Mezzanine
37.3 × 46 mm103 parts6LNo license0
MPPT addon board
90.2 × 95.9 mm48 parts2LNo license0
Raspberry Pi Interface Board
56 × 65 mm38 parts4LNo license0
Battery Board
95.9 × 90.2 mm31 parts4LNo license0
Z+ Panel
97 × 97.3 mm28 parts4LNo license0
Raspberry Pi433MHz Ground Station Board
95.5 × 56 mm14 parts4LNo license0
Groundstation 2400 Hat
65 × 56.5 mm10 parts4LNo license0