Team2
About the Team2 PCB
Team2 is an open source NXP PCB design by PeterRice4, published on GitHub. It is a 2-layer board, with 110 components from 22 distinct parts.
Its main chip is the Teensy4.1, from the NXP family. Other key parts include the S-1142DA0I-E6T1U and TQL850CSV50_RLG. By type, the board carries 45 resistors, 23 capacitors, 20 connectors, 15 diodes, 3 ICs and 2 transistors.
Main components on the Team2
Team2 bill of materials (BOM)
110 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | S-1142DA0I-E6T1U | HSOP6-A-PKG_FH006-A-P-SD-2.1_ABL | U1 |
| 1 | Teensy4.1 | Teensy41 (footprint NEW) | U2 |
| 1 | TQL850CSV50_RLG | SOIC127P600X170-9N | U3 |
| 1 | SQM40P10-40L_GE3 | SQM40P1040L_GE3 | Q1 |
| 1 | SQ2318AES-T1_BE3 | SOT95P237X112-3N | Q2 |
| 15 | Conn_01x03_MountingPin | JST_B3B-XH-A_LF__SN_ | J1, J2, J3, J4, J5, J6, J7, J8 +7 |
| 1 | Conn_01x03_Pin | FanPinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | Conn_01x08_Pin | J16 | |
| 2 | XT60-M | AMASS_XT60-M | J17, J18 |
| 1 | Conn_01x02_Pin | J21 | |
| 1 | Fuse | 0456050.DRSD | F1 |
| 1 | SW_SPST | SW_G-107-0513 | SW1 |
| 15 | LED | D1, D2, D3, D4, D5, D6, D7, D8 +7 | |
| 20 | C | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 +12 |
| 1 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 2 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16, C17 |
| 40 | R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +32 |
| 1 | 15k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27 |
| 1 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 8k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R30 |
| 1 | R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R46 |
Team2 design files
The KiCad project lives in the PeterRice4/Team2 repository on GitHub; these links point at the commit this page was built from.
- LayoutTeam2/Team2-New.kicad_pcb
- SchematicTeam2/Team2-New.kicad_sch
Team2: common questions
What microcontroller does the Team2 use?
The Team2 is built around the Teensy4.1, from the NXP family.
How big is the Team2 PCB?
The Team2 has 2 copper layers and is 1.6 mm thick.
How many components are on the Team2?
110 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Team2 design files?
From the PeterRice4/Team2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Team2 design in my own project?
The repository has no license, so all rights stay with PeterRice4. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Team2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532