Keypad-Board
phancak·Keypad-Board
About the Keypad-Board
Keypad-Board is an open source STM32 PCB design by phancak, published on GitHub under the MIT license. It is a 2-layer board measuring 45 × 62 mm, with 36 components from 8 distinct parts.
Its main chip is the STM32L010K4T6, from the STM32 family. Other key parts include the TMUX136RSER. By type, the board carries 17 capacitors, 15 ICs and 4 connectors.
It belongs with the keyboards, iot & wireless and power & battery designs in this gallery.
From the project
A compact, low-power keypad module based on the STM32L010K4T6 MCU. Featuring a 12-button interface, this board communicates with a host MCU via I2C or UART and serves as a mini keyboard for embedded systems. Ideal for IoT and embedded applications where user input is required with minimal power consumption.
This design optimizes processing efficiency on the host system by offloading keypad management to the STM32L010K4T6, making it ideal for applications requiring reliable user input with minimal power consumption.
/Hardware - PCB schematics and design files /Schematic - Circuit diagrams (PDF, KiCad, Altium, etc.) /PCB - Board layout files (Gerber, BOM, assembly files)
Main components on the Keypad-Board
Keypad-Board bill of materials (BOM)
36 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L010K4T6 | STM32L010K4T6 _QFP80P900X900X160-32N | IC1 |
| 1 | TMUX136RSER | TMUX136RSER | IC2 |
| 13 | ~ | Button_KMR231GLFS | U9, U10, U11, U12, U13, U14, U15, U16 +5 |
| 1 | Data_Conn | PinHeader_1x04_P2.54mm_Horizontal | J3 |
| 1 | SEL Jumper | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | SW_Header | PinSocket_1x05_P2.54mm_Horizontal | J5 |
| 1 | BOOT Jumper | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 17 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10, C11, C12, C13, C14, C15, C16 +9 |
Keypad-Board design files
The KiCad project lives in the phancak/Keypad-Board repository on GitHub; these links point at the commit this page was built from.
- LayoutKeypad_Board.kicad_pcb
- SchematicKeypad_Board.kicad_sch
Keypad-Board: common questions
What microcontroller does the Keypad-Board use?
The Keypad-Board is built around the STM32L010K4T6, from the STM32 family.
How big is the Keypad-Board?
The Keypad-Board measures 45 × 62 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Keypad-Board?
36 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Keypad-Board design files?
From the phancak/Keypad-Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Keypad-Board design in my own project?
Yes, under the terms of its MIT license, which phancak chose for the repository.
Can I test firmware for the Keypad-Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k