Amp hal st
About the Amp hal st PCB
Amp hal st is an open source PCB design by philips-software, published on GitHub under the MIT license. It is a 2-layer board measuring 162 × 150 mm, with 18 components from 11 distinct parts.
By type, the board carries 11 connectors, 5 resistors and 2 diodes.
From the project
HAL implementation of the Embedded Infrastructure Library for ST microcontrollers
Description: amp-hal-st is a HAL (Hardware Abstraction Layer) implementation for a range of ST ARM Cortex-based micro-controllers. amp-hal-st implements the interfaces defined as part of [EmbeddedInfraLib].
amp-hal-st requires: - [EmbeddedInfraLib].
amp-hal-st cannot be built by-itself, it must be built as part of a larger project. This paragraph describes how to add amp-hal-st to a CMake build-system, using [EmbeddedInfraLib].
Amp hal st bill of materials (BOM)
18 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CONN_02X08_ODD_EVEN Conn_02x08_Odd_Even | PinHeader_2x08_P2.54mm_Vertical | J1, J2 |
| 2 | CONN_02X10_ODD_EVEN Conn_02x10_Odd_Even | PinHeader_2x10_P2.54mm_Vertical | J3, J4 |
| 2 | CONN_02X15_ODD_EVEN Conn_02x15_Odd_Even | PinHeader_2x15_P2.54mm_Vertical | J5, J6 |
| 2 | CONN_02X17_ODD_EVEN Conn_02x17_Odd_Even | PinHeader_2x17_P2.54mm_Vertical | J7, J8 |
| 1 | CONN_01X02 Conn_01x02 | PinSocket_1x02_P2.54mm_Vertical | J9 |
| 1 | CONN_02X02_ODD_EVEN Conn_02x02_Odd_Even | PinHeader_2x02_P2.54mm_Vertical | J10 |
| 1 | USB_C_RECEPTACLE_POWERONLY_6P USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J11 |
| 2 | 1N4148WS | D_SOD-323 | D1, D2 |
| 2 | 5K1 5k1 | R_0603_1608Metric | R1, R2 |
| 2 | 2K2 2k2 | R_0603_1608Metric | R3, R4 |
| 1 | 3K3 3k3 | R_0603_1608Metric | R5 |
Amp hal st design files
The KiCad project lives in the philips-software/amp-hal-st repository on GitHub; these links point at the commit this page was built from.
Amp hal st: common questions
How big is the Amp hal st PCB?
The Amp hal st measures 162 × 150 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Amp hal st?
18 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Amp hal st design files?
From the philips-software/amp-hal-st repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Amp hal st design in my own project?
Yes, under the terms of its MIT license, which philips-software chose for the repository.