Touch lamp

picli3·touch-lamp

Touch lamp PCB layout, top view — open source board by picli3

About the Touch lamp PCB

Touch lamp is an open source PCB design by picli3, published on GitHub. It is a 2-layer board measuring 40 × 36.7 mm, with 10 components from 9 distinct parts.

Other key parts include the SGL8022W. By type, the board carries 5 resistors, 3 capacitors, 1 IC and 1 transistor.

From the project

PCB con 3 LEDs que simulan ser filamento incandescente, diseñada para integrarse en una lámpara vintage. El control táctil está basado en el circuito integrado SGL8022W, que permite encendido/apagado y regulación de intensidad luminosa (dimmer) con solo tocar el electrodo sensor.

PCB con 3 LEDs que simulan ser filamento incandescente, diseñada para integrarse en una lámpara vintage. El control táctil está basado en el circuito integrado SGL8022W, que permite encendido/apagado y regulación de intensidad luminosa (dimmer) con solo tocar el electrodo sensor.

- Control táctil basado en SGL8022W (SOP-8) - 3 LEDs dispuestos para simular un filamento incandescente vintage - Regulación de intensidad — toques repetidos cambian el brillo (ciclo: apagado → bajo → medio → alto → apagado) - Alimentación: 5 VCC - Formato compacto ideal para montaje dentro de lámparas decorativas -…

Touch lamp, from the project README
From the project README

Main components on the Touch lamp

Touch lamp bill of materials (BOM)

10 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SGL8022W
U1
1
Q_NPN
Q1
1
100nF
C1
1
10uF
C2
1
10nF
C3
1
4.7k
R1
1
1k
R2
1
5.1
R3
2
5.1k
R4, R5

Touch lamp design files

The KiCad project lives in the picli3/touch-lamp repository on GitHub; these links point at the commit this page was built from.

Touch lamp: common questions

How big is the Touch lamp PCB?

The Touch lamp measures 40 × 36.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Touch lamp?

10 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Touch lamp design files?

From the picli3/touch-lamp repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Touch lamp design in my own project?

The repository has no license, so all rights stay with picli3. Use it as a reference, and ask the author before reusing the design.