Artemis harness tester
About the Artemis harness tester PCB
Artemis harness tester is an open source PCB design by PlanBRandom, published on GitHub under the MIT license. It is a 2-layer board measuring 140 × 70 mm, with 23 components from 3 distinct parts.
Other key parts include the Artemis_ATP. By type, the board carries 1 IC and 1 connector.
From the project
Production-grade cable harness tester using SparkFun Artemis ATP for P3/P1/P2 assemblies with automated continuity, resistance, leakage, and zener tests
Production-grade 21-channel cable harness tester for SparkFun Artemis ATP fixtures.
- Auto-generated 21x21 connectivity matrix from a simple netlist - Open, short, and crosstalk detection - Per-channel resistance measurement with JSON output - Profile-based limits for automated pass/fail checks - Python CLI, live dashboard, and CSV viewer tools
1. Open firmware/harnesstester.ino in Arduino IDE, or build from platformio.ini. 2. Install SparkFun Artemis board support. 3. Flash the firmware to the Artemis ATP. 4. Open a serial terminal at 115200` baud.
Main components on the Artemis harness tester
Artemis harness tester bill of materials (BOM)
23 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Artemis_ATP | Artemis_ATP | U1 |
| 1 | Harness_21CH | TerminalBlock_1x21_P5.08mm | J1 |
| 21 | 1k | R_0805 | RDRV0, RDRV1, RDRV2, RDRV3, RDRV4, RDRV5, RDRV6, RDRV7 +13 |
Artemis harness tester design files
The KiCad project lives in the PlanBRandom/artemis-harness-tester repository on GitHub; these links point at the commit this page was built from.
Artemis harness tester: common questions
How big is the Artemis harness tester PCB?
The Artemis harness tester measures 140 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Artemis harness tester?
23 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Artemis harness tester design files?
From the PlanBRandom/artemis-harness-tester repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Artemis harness tester design in my own project?
Yes, under the terms of its MIT license, which PlanBRandom chose for the repository.
