Auxiliary
About the Auxiliary PCB
Auxiliary is an open source PCB design by plerros, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 78.4 × 48.2 mm, with 8 components from 7 distinct parts.
By type, the board carries 3 switches, 2 connectors and 2 diodes.
Auxiliary bill of materials (BOM)
8 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x03 | PCB | J1 |
| 1 | Conn_01x05_Socket | JST_PH_S5B-PH-K_1x05_P2.00mm_Horizontal | J5 |
| 1 | 10K | Potentiometer_Piher_PC-16_Single_Horizontal | RV1 |
| 1 | Tactile | SW_PUSH_6mm | SW1 |
| 1 | Membrane | SW_PUSH_8.5mm | SW2 |
| 1 | Toggle | SW_Push_2P2T_Toggle_CK_PVA2OAH5xxxxxxV2 | SW3 |
| 2 | 1N581 | D_A-405_P10.16mm_Horizontal | D1, D4 |
Auxiliary design files
The KiCad project lives in the plerros/Haptic-Bracelet repository on GitHub; these links point at the commit this page was built from.
Auxiliary: common questions
How big is the Auxiliary PCB?
The Auxiliary measures 78.4 × 48.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Auxiliary?
8 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Auxiliary design files?
From the plerros/Haptic-Bracelet repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Auxiliary design in my own project?
Yes, under the terms of its GPL-3.0 license, which plerros chose for the repository.
