PCBassProShop
About the PCBassProShop PCB
PCBassProShop is an open source PCB design by polygnomial, published on GitHub. It is a 2-layer board measuring 46.3 × 46.3 mm, with 18 components from 12 distinct parts.
Other key parts include the C1849462. By type, the board carries 8 capacitors, 4 diodes, 4 resistors, 1 IC and 1 connector.
From the project
- Power Architecture - RT1170 and RT1060 pin map - slides and other notes - Tim's review - TODO move other notes here
- Power Architecture - RT1170 and RT1060 pin map - slides and other notes - Tim's review - TODO move other notes here
CPU (RT1170) + RAM (MRAM - SEMC and xSPI) + power breakout board, with 2x 100-pin board to board connectors.
Eventual functional ADCS controller and sensor mainboard that the CPU board will sit on top of
Development breakout board that breaks out all the pins of the RT1170 CPU
Main components on the PCBassProShop
PCBassProShop bill of materials (BOM)
18 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C1849462 LTC2052IS_PBF | SO-14_S | U1 |
| 1 | C319148 5055670631 | CON_5055670631 | J1 |
| 4 | SFH2430 | Osram_SFH2430 | D1, D2, D3, D4 |
| 2 | 1UF 1nF | C_0402_1005Metric | C1, C3 |
| 1 | 1UF 100nF | C_0402_1005Metric | C2 |
| 1 | 22UF 100nF | C_0402_1005Metric | C4 |
| 1 | 10PF 1nF | C_0402_1005Metric | C5 |
| 1 | 4.7UF 100nF | C_0402_1005Metric | C6 |
| 1 | 4.7UF 1nF | C_0402_1005Metric | C7 |
| 1 | 2.2UF 100nF | C_0402_1005Metric | C8 |
| 1 | C5116354 3.9k | R_0402_1005Metric | R1 |
| 3 | 3.9k | R_0402_1005Metric | R2, R3, R4 |
PCBassProShop design files
The KiCad project lives in the polygnomial/adcs repository on GitHub; these links point at the commit this page was built from.
PCBassProShop: common questions
How big is the PCBassProShop PCB?
The PCBassProShop measures 46.3 × 46.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCBassProShop?
18 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PCBassProShop design files?
From the polygnomial/adcs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PCBassProShop design in my own project?
The repository has no license, so all rights stay with polygnomial. Use it as a reference, and ask the author before reusing the design.
More boards in adcs
- schematic only · 225 parts
Adcs hardware
225 parts2LNo license2 
NXPSoldermander panelized
73.7 × 73.7 mm161 parts6LNo license2
NXPSoldermander
60 × 60 mm161 parts6LNo license2
PiCoral
90.2 × 95.9 mm92 parts6LNo license2
Sqrt of g
90.2 × 95.9 mm62 parts4LNo license2
PCBranch
90.2 × 95.9 mm7 parts4LNo license2
PrintedCoralBoard
90.2 × 95.9 mm6 parts4LNo license2