Airspeedsensor
About the Airspeedsensor PCB
Airspeedsensor is an open source STM32 PCB design by Pro-engineer616, published on GitHub. It is a 2-layer board, with 94 components from 48 distinct parts.
Its main chip is the STM32L431CCUx, from the STM32 family. Other key parts include the RM3100, NCP692MN33T2G, L05D-M25125, 5525DSO-DB001DS and SDP33-1500PA-TR-250PCS. By type, the board carries 37 capacitors, 22 resistors, 7 ICs, 7 diodes, 6 test points and 5 inductors.
Main components on the Airspeedsensor
Airspeedsensor bill of materials (BOM)
94 components, 48 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L431CCUx Analog Devices | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | RM3100 RM3100_MagI2C_QFN28 Analog Devices | RM3100_MagI2C_MLF_4x4mm_P0.4 | U2 |
| 1 | NCP692MN33T2G | DFN6_3X3_ONS-L | U6 |
| 1 | L05D-M25125 | DS-0432 | U9 |
| 1 | 5525DSO-DB001DS | SO14_MS5525DSO_TEC | U10 |
| 1 | SDP33-1500PA-TR-250PCS | SDP3x | U104 |
| 1 | TJA1051TK/3 | DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U105 |
| 1 | 24 MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
| 1 | 2132271210 TFM_102_02_L_DH_TR MOLEX | SAMTEC_TFM-102-02-L-DH | J1 |
| 1 | TFM-108-02-L-DH SM06B-GHS-TB Samtec | CONN_SM06B-GHS-TB_JST | J3 |
| 4 | MountingHole | MountingHole_2.1mm | H1, H2, H3, H4 |
| 2 | M1.4 | Mounting_Wuerth_WA-SMSI-M1.6_H1.5mm_9774015633 | H5, H6 |
| 1 | TS-1088R-02026 | TS1088R02026 | SW2 |
| 6 | TestPoint_Small | TestPoint_Pad_D1.0mm | TP101, TP102, TP103, TP104, TP105, TP106 |
| 1 | NCD0603C1 red Foshan NationStar Optoelectronics | LED_0201_0603Metric | D4 |
| 1 | NCD0603C1 green Foshan NationStar Optoelectronics | LED_0201_0603Metric | D5 |
| 1 | NCD0603C1 blue Foshan NationStar Optoelectronics | LED_0201_0603Metric | D6 |
| 4 | PESD3V3S1UL,315 | PESD5V0S1BL315 | D10, D11, D12, D13 |
| 2 | 120R | C_0201_0603Metric | FB1, FB2 |
| 2 | RM3100 RM3100_Sen-XY-f | RM3100_Sen-XY-f | L101, L102 |
Show 28 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RM3100 RM3100_Sen-Z-f | RM3100_Sen-Z-f | L103 |
| 1 | GMK325BJ226MM-P 10n Taiyo Yuden | C_0201_0603Metric | C1 |
| 1 | TAJD337K010RNJ 100n -- | C_0201_0603Metric | C4 |
| 4 | 1u | C_0201_0603Metric | C9, C15, C26, C27 |
| 1 | 10u | C_1206_3216Metric | C12 |
| 1 | 10u | C_0805_2012Metric | C13 |
| 1 | FCC1206B471K102DT 100n FOJAN | C_0201_0603Metric | C14 |
| 9 | 100n | C_0201_0603Metric | C16, C25, C29, C30, C31, C32, C117, C118 +1 |
| 4 | EMF105B7104KVHF 100nF | C_0201_0603Metric | C17, C102, C105, C107 |
| 2 | EMK212BB7106MG-T 10uF -- | C_0402_1005Metric | C18, C104 |
| 6 | 10u | C_0402_1005Metric | C19, C28, C120, C122, C125, C127 |
| 1 | CGA0402X5R226M100GT 10u HRE | C_0402_1005Metric | C20 |
| 1 | GRM033C71C104KE14D 100n Murata Electronics | C_0201_0603Metric | C21 |
| 2 | CGA0402X5R226M100GT 100n HRE | C_0201_0603Metric | C22, C23 |
| 1 | 6.8p | C_0201_0603Metric | C33 |
| 1 | C3216X7T2W104KT000N 6.8p TDK | C_0201_0603Metric | C34 |
| 1 | 100n 16V X7R | C_0201_0603Metric | C116 |
| 5 | WR02X1002FAL 10k | R_0201_0603Metric | R1, R114, R115, R118, R119 |
| 1 | RTT023743FTH 10k RALEC | R_0201_0603Metric | R3 |
| 2 | RC0201FR-07220RL 220R Walsin Tech Corp | R_0201_0603Metric | R4, R9 |
| 1 | RC0201FR-07130KL 10k YAGEO | R_0201_0603Metric | R5 |
| 1 | 1k | R_0201_0603Metric | R6 |
| 1 | RC0402FR-075KL 1k YAGEO | R_0201_0603Metric | R7 |
| 1 | SC0201F1003G1BNRH 1k Sunway | R_0201_0603Metric | R8 |
| 1 | 33k | R_0201_0603Metric | R105 |
| 6 | RC-01W1210FT 121R 1% | R_0201_0603Metric | R106, R107, R108, R109, R110, R111 |
| 2 | 10k | R_0201_0603Metric | R112, R113 |
| 1 | 120 | R_0201_0603Metric | R120 |
Airspeedsensor design files
The KiCad project lives in the Pro-engineer616/pcb_projects_Alex repository on GitHub; these links point at the commit this page was built from.
Airspeedsensor: common questions
What microcontroller does the Airspeedsensor use?
The Airspeedsensor is built around the STM32L431CCUx, from the STM32 family.
How big is the Airspeedsensor PCB?
The Airspeedsensor has 2 copper layers and is 1.6 mm thick.
How many components are on the Airspeedsensor?
94 components, from 48 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Airspeedsensor design files?
From the Pro-engineer616/pcb_projects_Alex repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Airspeedsensor design in my own project?
The repository has no license, so all rights stay with Pro-engineer616. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Airspeedsensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in pcb_projects_Alex
Infrastructure
76 × 57 mm105 parts8LNo license1
STM32SensornodeV1.2
53 × 36 mm88 parts6LNo license1
Radxa Shield Rev. 1.2
56 × 65.1 mm57 parts4LNo license1
Radxa Shield Rev. 1.1
56 × 65.1 mm55 parts2LNo license1
PDB
86.5 × 150 mm53 parts4LNo license1
PDB1.2
86.5 × 150 mm38 parts6LNo license1
PDB1.4
86.5 × 150 mm38 parts6LNo license1
RADXA5.0
56 × 65.1 mm14 parts2LNo license1
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32LibreVNA
jankae
122 × 98 mm592 parts6LGPL-3.01.6k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k