STM32F4surface
profdc9·STM32F4surface
About the STM32F4surface PCB
STM32F4surface is an open source STM32 PCB design by profdc9, published on GitHub. It is a 2-layer board measuring 25.5 × 70 mm, with 28 components from 19 distinct parts.
Its main chip is the STM32F103RET6, from the STM32 family. Other key parts include the LM1117-3.3. By type, the board carries 11 capacitors, 6 resistors, 5 connectors, 2 ICs, 2 crystals and 1 jumper.
From the project
A STM32F4/STM32F1 LQFP64 surface mount PCB
This is a Bluepill pinout-compatible devboard for the STM32F405RGT6 LQFP-64 microcontroller. It uses surface mount parts and includes the JLCPCB/LCSC part BOM. This material is copyrighted by Daniel Marks (KW4TI) and licensed under the Creative Commons License CC-BY-SA 4.0. Software is copyrighted using the zlib open-source license.
STM32alt-BOM-STM32F4.xlsx is for populating with a STM32F405RGT6 STM32alt-BOM-STM32F1.xlsx is for populating with a STM32F103RET6
Main components on the STM32F4surface
STM32F4surface bill of materials (BOM)
28 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32F103RET6 STM32f405RGT6 | LQFP-64_10x10mm_Pitch0.5mm | U2 |
| 1 | C115962 8 MHz | Crystal_SMD_5032-2pin_5.0x3.2mm | Y1 |
| 1 | Crystal | Crystal_SMD_3215-2pin_3.2x1.5mm | Y2 |
| 1 | USB_B | USB_B | J3 |
| 1 | CONN_01X04 Conn_01x04 | Pin_Header_Straight_1x04_Pitch2.54mm | J4 |
| 2 | CONN_01X20 Conn_01x20 | Pin_Header_Straight_1x20_Pitch2.54mm | J5, J9 |
| 1 | CONN_01X02 Conn_01x02 | SW_PUSH_6mm | J7 |
| 1 | Jumper_NC_Dual | Pin_Header_Straight_1x03_Pitch2.54mm | JP1 |
| 1 | LED | LED_0805_HandSoldering | D4 |
| 2 | C17477 2.2 uF | C_0805_HandSoldering | C1, C2 |
| 2 | 1 uF | C_0805_HandSoldering | C7, C13 |
| 2 | 0.1 uF | C_0805_HandSoldering | C8, C9 |
| 4 | 20 pF | C_0805_HandSoldering | C12, C14, C15, C16 |
| 1 | 10 nF | C_0805_HandSoldering | C17 |
| 1 | 100K 100k | R_0805_HandSoldering | R1 |
| 2 | 1.5K 1.5k | R_0805_HandSoldering | R3, R9 |
| 2 | 22R | R_0805_HandSoldering | R4, R6 |
| 1 | 470R | R_0805_HandSoldering | R11 |
STM32F4surface design files
The KiCad project lives in the profdc9/STM32F4surface repository on GitHub; these links point at the commit this page was built from.
STM32F4surface: common questions
What microcontroller does the STM32F4surface use?
The STM32F4surface is built around the STM32F103RET6, from the STM32 family.
How big is the STM32F4surface PCB?
The STM32F4surface measures 25.5 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32F4surface?
28 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the STM32F4surface design files?
From the profdc9/STM32F4surface repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the STM32F4surface design in my own project?
The repository has no license, so all rights stay with profdc9. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32F4surface without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k