Onboard Comp
ProfeRimoldi·Proyecto_CanSAT·hardware/Onboard_Comp/kicad/Onboard_Comp.kicad_pcb
About the Onboard Comp PCB
Onboard Comp is an open source PCB design by ProfeRimoldi, published on GitHub. It is a 2-layer board measuring 69.5 × 69.5 mm, with 24 components from 22 distinct parts.
Other key parts include the 25CSM04XXSN. By type, the board carries 13 connectors, 3 capacitors, 2 resistors, 1 IC, 1 buzzer and 1 switch.
From the project
Sistema electrónico para misión tipo CanSat desarrollado en la EEST N°4 I Brigada Aérea El Palomar, orientado al diseño, validación y documentación de hardware y firmware para sistemas embarcados aeroespaciales.
Sistema electrónico para misión tipo CanSat desarrollado en la EEST N°4 I Brigada Aérea El Palomar, orientado al diseño, validación y documentación de hardware y firmware para sistemas embarcados aeroespaciales.
Este repositorio centraliza el desarrollo de:
Onboard Computer (OBC) Earth Station Dev Board Firmware ESP32 Documentación técnica * Revisiones de fabricación de PCB
Main components on the Onboard Comp
Onboard Comp bill of materials (BOM)
24 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 25CSM04XXSN 25CSM04xxSN | SOIC-8_5.23x5.23mm_P1.27mm | U1 |
| 1 | SOCKET_UP | PinSocket_1x02_P2.54mm_Vertical | J1 |
| 2 | PLACA | PinHeader_1x02_P1.27mm_Vertical | J4, J8 |
| 1 | HEADER_DOWN | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | PLACA | PinHeader_1x12_P1.27mm_Vertical | J12 |
| 1 | CONN_01X08_SOCKETMPU Conn_01x08_SocketMPU | PinSocket_1x08_P2.54mm_Vertical | J13 |
| 1 | CONN_01X04_SOCKET Conn_01x04_Socket | PinSocket_1x04_P2.54mm_Vertical | J14 |
| 1 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J15 |
| 2 | CONN_01X02 Conn_01x02 | PinSocket_1x02_P2.54mm_Vertical | J16, J21 |
| 1 | CONN_01X06_SOCKET Conn_01x06_Socket | PinSocket_1x06_P2.54mm_Vertical | J17 |
| 1 | CONN_01X02 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J18 |
| 1 | CONN_01X03 Conn_01x03 | PinSocket_1x03_P2.54mm_Vertical | J19 |
| 1 | Buzzer | Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | SW_SPDT | SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW1 |
| 1 | CONN_01X19_PIN Conn_01x19_Pin | PinSocket_1x19_P2.54mm_Vertical | esp1 |
| 1 | Conn_01x19_Pin | PinSocket_1x19_P2.54mm_Vertical | esp32_1 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | 100NF 100nF | C_0805_2012Metric | C1 |
| 1 | 100UF 100uF | CP_Elec_5x3.9 | C2 |
| 1 | C_Polarized_Small | C_0805_2012Metric | C3 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1K | R_0805_2012Metric | R1 |
| 1 | R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
Onboard Comp design files
The KiCad project lives in the ProfeRimoldi/Proyecto_CanSAT repository on GitHub; these links point at the commit this page was built from.
Onboard Comp: common questions
How big is the Onboard Comp PCB?
The Onboard Comp measures 69.5 × 69.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Onboard Comp?
24 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Onboard Comp design files?
From the ProfeRimoldi/Proyecto_CanSAT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Onboard Comp design in my own project?
The repository has no license, so all rights stay with ProfeRimoldi. Use it as a reference, and ask the author before reusing the design.